Viera model TH-42PV600AZ Has a black vertical line down the centre of the screen

SOURCE: VERTICAL LINE ON TH-42PX70B

hi has any1 got partd for the panasonic th 42px70b i need to 2 long bottom boards that the screen ribbons plug into and the control board which the 2 long boards plug into any 1 has these parts plz email me [email protected]

SOURCE: Hi. I have a Panasonic

have you try adjusting all the settings, and checking the wire connections?

SOURCE: 2 yr old Panasonic Viera 37 in - has very narrow

This is a fault developing within the screen, the only remedy is to have the screen replaced, there is no exact answer to why this has happened, it is just the nature of a plasma screens make-up that sometimes a fault can develop like this within the characteristics the display

Testimonial: "Thanks. Might have to live with it as it sounds expensive to replace!"

SOURCE: solid black vertical line

You could have one of three problems. One is really expensive to fix and you might want to trash the set. Thats if the panel is bad. Secondly, it could be a buffer board that went bad. Not as expensive as the panel. Finally, it could be the connection between the two. I would first take the back off and locate this board. Undo the ribbon cable and clean it off a bit and put it back. If its still there, you have a deeper problem.

The buffer boards are located across the bottow when you take the back off. About 3 inches wide. Sometimes they are on the top as well.

SOURCE: panasonic viera with vertical lines down the screen

Either the buffer board is bad or the plasma panel,sometimes it coult be bad connections on the interconnect ribbon cables from the plasma panel to the buffer boards.