Question about Pride Jazzy 1650 Heavy Duty Power Wheelchair

1 Answer

Lights on joy stick controller blink on and off and chair wont move

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 692 Answers

Cezna Are the lights that are blimking the battery level lights or they the speed level lights. If it is the speed level lights then the chair thinks you still have the charger plugged in. If it is the battery level lights do a certain number of lights flash 3 lights flashing 4 lights flashes etc this is the flash code and will tell you what problem you have. It could also mean that you are in lockout or sleep mode If you have the VSI joystick then turn on the power immediately push the joystick forward and hold until you hear a beep then mmediately push it to the rear til you hear a beep then immediately let it return to the center position. If it was in sleep mode this should wake it up. Hope this helps you

Posted on Sep 13, 2010

  • James Rose Oct 17, 2010

    Had the same situation. I found that the cable from the joystick to the controller was partially disconnected. Pushed it together and it worked fine.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Light come on controller no flashing code lights joy stick does not work


The M51 could have the motor clutch levers in the free wheel/push mode and the joystick will not blink if this is the case. Make sure that the chair cannot be pushed. If it can be pushed it means it is in free wheel and you need to lock the motors in gear.

If it is in gear and the joysticks green light does not change color or blink it could be that the joystick is bad. When nothing happens and the lights don't blink when you push the joystick knob the chairs controller basically isn't recognizing the joystick movement.
Time to have the joystick repaired or more. Have a technician look at it.

Jun 16, 2015 | Invacare Pronto M51 Power Wheelchair

4 Answers

My chair will not change speeds. Very slow, No flashing lights


That is possible. Check the power circuit from the battery and see if there is any loose connections or resistance in the circuit via the voltage drop method. Here are some links that may help:

Jazzy 1113 ATS Parts

Redirect Notice

Redirect Notice

Mar 03, 2015 | Pride Jazzy 1113 Power Chair

1 Answer

How to reset manual brake control and where is it.lights go on( 2 red & 2 green) but jet joy stick is so touchy lights blink and I have to restart it.


If the joystick turns completely off when you try to drive it means the batteries instantly are dropping voltage below the operating capabilities. I have also seen bad connections in the battery wiring harness cause the same thing.

Sep 15, 2014 | Pride Mobility Products New Pride Mobility...

1 Answer

Jazzy 1113 power chair shows charged but control light is blicking. Chair will not move.


It appears that the controls are in Lock Mode. Unlocking Instructions depend on your type of controller. Go to PrideMobility.com to download the proper manuals for chair and controller.

Feb 11, 2013 | Pride Jazzy 1113 Power Chair

1 Answer

Lights scroll from lt to rt ant lights around joy stick flash fsta when joy stick is moved forward but the chair will not move


The lights indicate you are in charge mode or inhibit. Check to make sure the charger isn't plugged in. If it isn't then the inhibit function of the chair is bad and will have to be repaired Hope this helped

Apr 15, 2011 | Pride Mobility Products Quantum Jazzy 500...

1 Answer

Not sure witch jazzy chair i got but the joy stick blink and keeps blinking i have tried pushing horn button twice and also turning it on and pushing joy stick forward waiting for it to beep but no beep....


The jazzy probably has a VSI controller and if it is sleep mode then the lights will scroll rather than blink. Now turn on the chair and see if the blinks have a pause between them, ie 4 blinks pause 4 blinks pause etc If they do count the number of blinks and this will give you the error code ie 4 blinks right motor 3 blinks left motor your owners manual should have a chart listing the error codes If not you can contact Pride tech support @ 1-800-800-8586 ask for jazzy tech support

Hope this helps

Feb 17, 2011 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

Joystick not moving chair,a blinking light on keysign on joy stick panel


You need to check the little fuse and see if it is blown, if it is replace it, if not, it is like a 'check engine light' on a car, most of the newer chairs need a diagnostic test ran.... Guy

Sep 06, 2010 | Dmm Allure HP6 HD - Used Electric...

1 Answer

The charge lights blink and the chair won,t go.


Just had this problem with my Guardian Aspire. They had to replace the electronic box with the joy stick. BIG BUCKS!

Mar 12, 2009 | Jet Health & Beauty

Not finding what you are looking for?
Pride Jazzy 1650 Heavy Duty Power Wheelchair Logo

972 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1412 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Pride Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...