I am looking for the user manual for the Ingersoll Rand SSD2 NPT Series Compressed Air Condensate Drain. Can you help?

First, I'm not a Ingersoll Rand representative.
* Contact ; https://www.ingersollrandproducts.com/en-ca/power-tools/manuals-and-tech-documents.html

*** Following for information only.***
* "Oil Less" refers to pumps that may not have bearings bathed in liquid lubricate. (but still may be greased or have 'sealed' bearings.)
* You can usually tell if a pump requires liquid lubricant as there will be a removable plug at the base of pump. There will probably a site class or level check plug about mid point in the crank case. The window will be in line with the center of the crank shaft. There may be an air relief cap or plug higher up in the crank case to allow heated air to expand out of the crank case.
* Oil Less pumps tend to be smaller and frequently coupled directly to the motor (usually electric AC or DC).
* Oil Less pumps are common on portable Automotive air compressors running on 12VDC from lighter outlet.
* Oil Less in larger sizes tend to overheat quickly. They are usually used in low volume applications. Small air brushes, brad nailers, etc.

* "Oil free" usually refers to "No oil (mist) in air output" used in food industry to prevent contamination. (oils, water, dust, are ultra filtered at the output of compression cycle.)
* Catalog of "oil Free"; https://www.ingersollrandproducts.com/en-la/air-compressor/products/oil-free-rotary-screw-air-compressor.html?page=2#resultsTopAnchor
* 2340; https://www.ingersollrandproducts.com/dam/ir-products/documentlibrary/recip-support/22607402.pdf
* P185WJD, XP185WJD; https://www.about-air-compressors.com/support-files/185.pdf
Aloha, ukeboy57

* Additional information;
* Troubleshooting; https://manualarchive.ingersollrandproducts.com/manuals/manuals/instructionbook/Misc_Manuals/troubleshooting.pdf
* Other models; https://www.ingersollrandproducts.com/en-ap/air-compressor/products/reciprocating-air-compressors/wheelbarrow.html

https://power-tool.needmanual.com/ingersoll-rand-175-cfm-s01100-portable-air-compressor-owners-manual.html?d=df_m_en&tf=1b3431e46cf56a003c6f54dfbc2dfd90&trd=3d1a44b0fd or

https://power-tool.needmanual.com/ingersoll-rand-175-cfm-s01100-portable-air-compressor-owners-manual

About 31,000 results (0.83 seconds) Search Results

[PDF]IRM-G-8780 2-25hp US - Ingersoll Rand Air Compressor

www.ingersollrandproducts.com/...

Ingersoll Rand Industrial TechnologiesIngersoll Rand compressors are not designed, intended or approved for breathing ...does not approve specialized equipment for breathing air applications and ... unmatched service to meet your needs. ... drain, and low-oil-level .... Oil Sight Glass ... Value Package (5, 7.5, 10 & 15hp) An economical choice in a dependable ...

[PDF]Owner's Manual - Air Compressors Direct

www.aircompressorsdirect.com/.../irmanual2340_2475_2545_7100_15t...
installation, operation and maintenance of your Ingersoll-Rand air ... An air-cooled aftercooler, low oil level ... for Models 2340, 2475, 2545, 7100, 15T & 3000 ... Ifcooling of the discharge air is required, .... motor does not have this button and the unit does not have a ..... l Drain compressor oil and clean oil sight glass.

[PDF]XF 7.5 - 15 EP 7.5 - 15 HP 7.5 - 15 XP 7.5 - 15

diagramasde.com/.../Manual%20comp%20ingersollrand%20SSR-15.pdf
EP 7.5 - 15. HP 7.5 - 15. XP 7.5 - 15 ... The Ingersoll-Rand Company Rotary Screw Air Compressor that has been filled prior to its ... after shall have its AIREND warranted for twenty four (24) months from the ... comes first, when using ULTRA COOLANT.Coolant ...... check coolant level in the sight glass on the separator tank.

Ingersoll Rand Air Compressors - About Air Compressors

www.about-air-compressors.com/Ingersoll-Rand-air-compressors.html

Dear Joe Bell,

This is Rodciel L. Camacho of VISMIN compressed air care center we are specialize in ingersoll rand air compressor.
You mean a overhauling kit?The part number of that is 34319469.

Hope i can help you..

Please check out the Web Site Below. It is a Quick Start manual for IR Compressors.

It should have everything you need. It DOES NOT Show you any wiring connections AT the motor.

Hope this helps....Jim

http://www.irtechpubs.com/ir_pdfs/Compressed%20Air/Air%20Compressors/Reciprocating%20Compressor/80445703.PDF

According to the information you provided your looking at a 10 HP motor at three phase. Do you have three phase at your location? If not I would look into getting a single phase compressor. If you do want to get it going I would notify your local IR dealer so they can get you the right Model number, RPM, Pulley and Motor Frame Size to match your unit.

Please read below....Jim...if this helped you please send me a positive response...Thanks!


Ingersoll-Rand Type-30 Electric-Driven Two Stage Horizontal Air Compressor - 120 Gallon - Fully Packaged IR 2545E10VFP

• Designed for heavy shop or industrial use, Ingersoll-Rand Two-Stage electric air compressors provide the quality and performance that are ideal for most applications and users, including: automotive service and body shops; fleet maintenance; machine shops; production and manufacturing lines; construction; wood working shops; dry cleaners; car washes; maintenance/repair shops and farms.
• Durable cast-iron, two-stage design offers extended pump life for years of trouble-free service 175 PSI maximum operating pressure
• 100% continuous duty for tough applications
• Automatic start/stop control/pressure switch operation
• Includes motor starter, oil sight glass (10-15 HP only), manual drain and ASME tank
• 10HP, 3 Phase 200, 230 or 460 Volts
• 120 gal, horizontal tank
• 35 ACFM @ 175 PSI

1/4" NPT, be sure that you only remove the fitting and not the entire bushing that fits in the bung.

Hope that helps,
under_psi

Try looking for a owners manual on the web under"Rand 213-KS- 1/2 ' Super duty air impact" or contact Rand.