I brought a Samsung TFT monitor (20'' Sync Master B2030).But I cannot understand it`s language. So I cannot change the monitor`s language, brightness ,contrast,......... I want change my monitors language.Also I want to download user manual.

It might, somes companies won't honour warranty unless you have 3 to 5 dead pixels. Go to www.samsung.com and contact customer support to see what can be done.

1600X900 is a higher resolution than that of 1280X1024. Therefore 1600X900 is a better resolution. If you would like to run at the lower resolution simply right click your desktop screen and click properties. Then on the settings tab use the slider bar to adjust the resolution. Lower to the left and higher to the right. If the desired resolution is unavailable then you could try downloading and installing the latest drivers for your graphics card installed in your computer.

Your card will either be AMD/ATI Radeon or Nvidia. You will need the model number of the graphics card, the latest drivers may increase resolution support for your card.

Also look on the bottom right hand side of your screen for an Nvidia Control Panel logo in green. Right click it and select the option to "change screen resolution" This may provide you with additional resolution options.

Take care!
damnor01

The Samsung B2030 LCD Monitor has no speakers, you cannot turn the volume up on it. Instead turn the volume up on the speakers, or on the computer itself.

unfourtintly its a dead strip array or thin transistors its irreplaceable get used to it

I think it's not an issue with your monitor. Try to set your monitor Resolution to 1600x900. If the resolution is not available then try download the latest graphics card driver from your manufacturer's website for your operating system.

OSD Lock & Unlock
When pressing the AUTO button after locking the OSD
When pressing the MENU button after locking the OSD
This is the function that locks the OSD in order to keep the current states of settings or prevent others
from adjusting the current settings.
Lock : Hold down the MENU button for more than five (5) seconds to activate the OSD adjustment
lock function.
Unlock : Hold down the MENU button for more than five (5) seconds to deactivate the OSD adjustment
lock function.
Please leave rating if it helps.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

change your monitors input channel, see if any channel has the picture on it.

u can press auto button above 6sec, solved this problem after power indicater is blinking

monitor turns itself off after about 10 sec.

Samsung Sync Master 2433BW has the brightness rectangule and monitor menu in one corner of my screen. How I disable/remove that rectangul?