Firmware upgrade was interrupted & now I can't connect to it. I have reset it 3 times & still nothing

Once a firmware download is interrupted, the camera usually becomes a useless "brick". You'll have to contact the support section of the manufacturer's website for instructions.

Try to upgrade the firmware of the router.
Is there any computer connected to the router with the cable.
If not then you will need to connect the computer to the router.
Download the firmware of the router from the manufacturer's website.
enter the model number. select proper version number and download the firmware of the router.
Once you download the firmware, you will need to open the router set up and upgrade the firmware of the router.
After upgrading the firmware, it is recommended that you reset and reconfigure the router.
Click Here for more information about router and networking

Try uninstalling and reinstalling the drivers and software.

Hi
As i can see that you have mentioned that the firmware upgrade was interrupted & now u can not access the router. Now you can try the following troubleshooting steps
1) press in the reset hole on the back of the router for 10-15 secs.
If it doesn't work
2) press in the reset hole for 10 secs & while pressing the hole take the power cable out, while still pressing the whole put the power cable back in &release the hole.
3) turn off the router for 1-2 mins & then turn it on.....& if the same problem persists that means that the router has gone faulty. You have to buy a new router or get it replaced from NETGEAR.

Thank You

What kind of adapter do you have? I was so sick of resetting the thing daily, that I just went and bought another router.

Linksys wireless router has many bugs: connection issues like no connection or constantly having to reset the router. It isn't compatible with many network adapters. Hope this helps!

Hi there !!

This is because of the old firmware you are using in the player. Go to link below to download the latest firmware 3. & everything will get back to normal.

http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?scy=US&slg=AEN&sct=FLASH_AUDIO_PLAYERS_SU&cat=MP3_PLAYERS_CA&grp=PORTABLE_ENTERTAINMENT_GR&session=20090908093859_59.164.5.137&ctn=SA261/17&ds=SA261/17&mid=Link_Software&hlt=Link_Software

Here's the instructions, how to update firmware in the music player:

Software/driver information
===========================

Firmware upgrade readme file - GoGear Digital AudioPlayer SA261 , SA260, SA255, SA250
Firmware (FW) version 3.0 + Philips driver for WindowsMedia Player


Benefits
========
By upgrading you will gain access to the followingenhanced functionalities:
- Solving the problem with occasional hang up afterfirmware upgrade.
- Adding of a Help file in Device Manager that user maycall up the file by pressing F1.

Do I need the software?
=======================
- Press the MENU key
- Scroll down to Settings
- Enter Settings by pressing the > key
- Scroll down to Information
- Enter Information by pressing the > key
- You will see FW Vers: xxx, where xxx is the version
- If you already have the latest version, there is noneed to upgrade.


Compatibility
================
Please make sure that your PC is running on one of thefollowing operating systems to perform the upgrade
- Windows 2000 �V SP4 (or above)
�http://www.microsoft.com/windows2000/downloads/servicepacks/sp4/default.asp
- Windows XP (home or Professional) SP1 (or above)
�http://www.microsoft.com/windowsxp/downloads/updates/sp1/default.mspx

How to download the software to your PC
=======================================
- Launch the Windows Explorer
- Enter the Philips support site at urlhttp://www.philips.com/support
- Select your resided country & language
- Enter the model number
- Click on Software under Product Support
- Double click your desired language under Firmwareupgrade software to download the firmware to your PC.
- Download the file in a temp directory on your PC.


How to upload the software to your device
=========================================

- Run the SA_PKG_xxx.exe file to install the DeviceManager with the new firmware
- Connect your GoGear to the PC using the provided USBcable
- Make sure that you have a new battery inserted.
- On your PC, double-click on the Philips GoGear DigitalAudio player icon to run / start the same.
- A dialogue box will pop up; click Upgrade to start theupgrading of the firmware.
� (Please do notdisconnect the device during the upgrading process as this interruption maydamage the firmware!)
- Follow all screen instructions to complete the firmwareupgrade.
- The Device Manager will close automatically once thesuccess message is displayed.
- Close all opened application and then safely removeyour GoGear micro jukebox by clicking on the eject icon in your task traybar.�
� When prompted,��The USB Mass Storage Device can now be safely removed from the system��,click OK and unplug your micro jukebox.�
- Once the GoGear micro jukebox is disconnected from thecomputer, the display will show ��Firmware Upgrading�� for a couple of secondsand then start up as usual.
� If the messagedoes not disappear after 2 minutes, do a soft reset by pressing and holding theplay key and the volume + key for a couple of seconds.
- Your GoGear firmware has been upgraded after you seethe "upgrading" message.

Note
=========
Windows XP and Windows 2000 users: Your device will beautomatically disconnected as soon as Device Manager finishes interacting withyour device.


Regard's
Anurag Shukla

linda if you have not upgraded your ipod`s firmware please do it because i was facing the same problem,i upgraded the firmware and it fixed the problem.you can upgrade the firmware using itunes and clicking on check for firmware.if the firmware is already upto date then please reload the same firmware.

take care.

Try to reset it, by pressing reset button

Here is how to hard-reset your MDA/Wizard using a key combo - courtesy of a smart T-Mobile tech support help desk guy who wrote a note about it as it's not in official help doc's: 1. Simultaneously hold down the Communication Manager and Voice Dial buttons and put the Soft Reset 'button' with the stylus tip - all at the same time. 2. You see a very scary looking black screen with white letters in System font reading something along the lines of ?Are You Sure? Press Send key to continue.? 3. When you push the 'Send' key, the Green pick-up the phone key process starts 4. Next you will see what made me smile like a kid - Formatting FAT partition and very briefly in matter of few seconds began normal first boot.