Does anyone know where I can find only the replaceable air filter for my beamer VLP-AW10 and what is his codename? I know you can find them in the lampbox, but I only buy the lamp (without frame)

Could you comment with more specific information about the bike. Make, exact model, engine size and year of manufacturer. This will help when looking for the manual.
Servicing a bike is usually the same for every make of bike. Oil filter on the side of the gearbox housing. Fresh oil. Air filter high on the side of the engine. New spark plugs. Fresh oil and check the brake pads.

Serial Number: DN6FXJPYDKPH
Model:- iPad 2 (WiFi)
Codename:- No codename assigned.
Build Country:- We don't know where this unit was built.
Build Year:- This unit was built in the first half of 2011.
Build Week- Week 26 (June)
Production Nr.:- This unit was number 2038 to be built that week.Serial Number: DN6FXJPYDKPH
Model:- iPad 2 (WiFi)
Codename:- No codename assigned.
Build Country:- We don't know where this unit was built.
Build Year:- This unit was built in the first half of 2011.
Build Week- Week 26 (June)
Production Nr.:- This unit was number 2038 to be built that week.

http://www.appleserialnumberinfo.com/Desktop/index.php

need to go into menu and reset filter and lamp hours

clean the air filter, and fit a new plug, first
If this doesnt help, there may be carbon build up in the exhaust port at the barrel

Depending on the filter you may be able to simply clean off the filter with a standard household vacuum instead of replacing it.

Bulb is not seated correctly of cover is not on correctly.

---

Please dont forget to vote this answer was helpful

Many thanks

------

if its error code 542 then its your fuser... its shot...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Hello. I would never treat any post as a joke. We are all novices at some aspects of life. Let me give you a suggestion that will be of great value and comfort to you. Drive to any auto zone or similar parts store where the clerks are also technicians and they will come out to your car and show you exactly what needs to be done. Don't worry about tools either as they loan tools for free. ?Enjoy your Beamer!!!

I just replaced my lamp for the same beamer. Took me a while to figure out how, but if you know how, it is easy. Turn the beamer on its back. In the middle, you will see a black rubber (small), it covers a hole and a screw is in the whole. Pull the small bblack rubber out. Unscrew the screw. A small cover will come loose. And there is the lamp, You have to pull out the power cable, and than only one little screw that mounts the lamp to the inside of the beamer.

It's easy!
Hope you will succeed,

Ojnoka