You have to double check in bios by pressing F2 when you turn on the system if theres any bluetooth installed on this system and then enable it
after enabling the device save and exit
then restart to normal mode
in normal mode press FN+F5
hope this help
Step 1: First connect the bluetooth device to USB port on your computer and check that it is detecting on your computer or not.
Step 2: Now insert the bluetooth software driver CD to your system that
will auto start after few seconds then follow instruction to finish
bluetooth software installation.
Step 3: Now go to 'start -> Devices and Printers' and click 'Add a device' from top of the window.
Step 4: Now your Windows 7 system will search the bluetooth device which connected to your system.
Step 5: Click the bluetooth device you want to install from the list and
then click the 'Next' button and wait for windows to configure the
bluetooth device. If prompted to enter a passcode, enter the default
code listed in the bluetooth device manual. In many cases, the default
passcode will be '0000'.
Now the bluetooth device has successfully installed and ready to use.
Note: If you bluetooth device was not listed in the search results from
Step 4, make the device discoverable. Access your Bluetooth-enabled
device's settings page, and turn on the device's 'Listen' or
'Discoverable' function to allow you computer to find it.
I hope it will help you. :-))
Feel free to get technical assistance at http://www.vtechsquad.com/lenovo-support/ if you get any issue with your Lenovo laptop/desktop.
Pairing is necessary when using the Bluetooth-enabled
device for the first time. Before starting the procedure, learn
how to enable the Bluetooth setting function and to connect
with other devices on the Bluetooth-enabled device.
1. Press BLUETOOTH on the remote controller.
The unit enters the pairing mode and the BLUETOOTH
indicator starts flashing.
2. While the BLUETOOTH indicator is flashing,
complete connection on the Bluetooth-enabled
device in the nearby area within about 2 minutes.
If the name of this unit is displayed on the Bluetoothenabled
device's display, select this unit. Paring will end
after a short time.
???? If a password is requested, enter "0000".
???? When connecting the unit to any other Bluetoothenabled
device, start pairing by pressing and holding
BLUETOOTH until the BLUETOOTH indicator starts
flashing. This unit can store the data of up to ten
paired devices, Thanks, JT
1,150 views
Usually answered in minutes!
×