Belkin (F5D8231-4) Wireless Router (F5D82314) Logo

Related Topics:

Posted on Sep 07, 2010

Wireless of my new belkin G wireless router Model F5D7234-4-H V5 is not functioning.How it is configured for wireless access

5 Related Answers

Anonymous

  • 113 Answers
  • Posted on Feb 22, 2008

SOURCE: network security

Once you've logged into the router (open your browser, and type ONLY this into the Address line, without the quotes: "192.168.2.1). You should get a log in pop-up, "admin" is the username, and the password is left blank (or is sometimes "password"), again without the quotes.

Once logged in, you have a series of menus on the left hand side, Usually large blue lines demark each section, i.e. "Lan Setup", "Internet WAN", and of course the section you are looking for "Wireless". Under each header is listed each of the pages available for that function. For example, under Wireless you'd want the first 2 items: "Channel and SSID" - this is where you set the name of the wireless network; and "Security", which is where you setup whichever one of the Encryption options you want. This Encryption key is the password you will use when connecting wirelessly to the router from a PC.

Hopefully that is enough to get you setup.

Ad

Anonymous

  • 310 Answers
  • Posted on Dec 16, 2009

SOURCE: Belkin Wireless Modem Router, model F5D7634-4.

If the reset did not help ,i would suggest you talk to the Belkin Support team and get a replacement. Since its a new router, I assume it has an up to date firmware .

Anonymous

  • 185 Answers
  • Posted on Jan 01, 2010

SOURCE: Belkin G Wireless Router not functioning.

If there are no lights on at all then it is toast. If just the power light comes on plug other devices in. How do you know it is getting power if the lights are off?

govinda123

Prashant M

  • 2278 Answers
  • Posted on Jan 13, 2010

SOURCE: Lost Belkin Wireless G Router F5D7230-4

Are you trying to install the router.
You can do it manually without the CD.
MAke sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

Anonymous

  • 2 Answers
  • Posted on Mar 04, 2010

SOURCE: unable to configure belkin n150 router manually

while connected to router, open internet browser and enter 192.168.2.1 into the address bar. this opens most belkin router setup utilities.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Bought brand new belkin router still in ceellophane wrap.hooked it up.inserted cd installed softwarebut wouldnt let me get on line and register it.called belkin and they stated was outdated and no lon

Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security
0helpful
1answer

I have a Belkin N wireless router. It's all set up but it shows as not being secured. How do I secure it? Model F5D8233-4v3

Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security
0helpful
1answer

Belkin N1 Wireless ADSL2 Model # F5D8631-4 Router router default address (192.168.2.1) is not opening, even i have reset the router

Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security
0helpful
1answer

Add a password

The router's encryption (password) is configured in the router's wireless settings.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security
0helpful
1answer

Dear Sir , i have belkin model no. F5d7234-4H v5 G wirless router, my installation CD lost, Sir How can get these driver CD, can you send link driver,

Connect a LAN cable from Belkin to your laptop/computer'sLAN port, open a browser on your laptop/computer and enter the Belkin'sconfiguration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security
2helpful
2answers

I have a Belkin F5D7234-4 v3 wireless router. I was wondering, is there any way to either upgrade to a different firmware version such as the v4, or just a simple way to make it more a wifi receiver?

You cannot upgrade v3 to v4 or v5. Belkin routers are junk, because once they come out with a new version you will never see a fix for your router. You have to go buy a new router if you want better access to the routers settings. You are better off buying another brand like I did. Belkin blows.
2helpful
1answer

Hi, does belkin wireless router model f5d7234-4-h v5 support wds?

Hello,

Yes Belkin router Model F5D7234-4-h v5 supports WDS. Please feel to contact us for information.
0helpful
1answer

Dont have my setup disc for my belkin wireless router model no f5d7234-4-h v5

Hi you can check the belkin site HERE. You can also download the manual so that you can follow how to set up your router
0helpful
1answer

I AM USING A BELKIN G WIRELESS ROUTER MODEL F5D72...

Either you have not configure the Wireless SSID or your router is faulty. You can use the easy setup using the CD or configure the router by going to the default IP address. Do read the setup manual first.
0helpful
1answer

Tew-630apb

hello!
-- what is the exact model number of your access point and router?
-- what is the ip address of your access point and router?
-- what is the operating system of your computer?
-- Is your computer directly connected to the router?
-- Do you have a wireless computer? what is the model number of the wireless adapter

if you want to configure your access point with your router you may try the ff:
Step 1: Connect the Ethernet port of the access point to one of the Ethernet ports of the router
Step 2: Make sure the power adapter is plugged to an available power outlet
Step 3: Check if the corresponding LEDs on the access point are lit
Step 4: After connecting the devices together, configure the access point’s wireless settings
Step 5: Open the access point’s web-based setup page
Step 6: When the access point’s web-based setup page opens, change the SSID, Channel, and Wireless Security.
Not finding what you are looking for?

604 views

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Brad Brown

Level 3 Expert

19187 Answers

Alexander

Level 2 Expert

171 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...