Refer to your manual, page 9, fig. 4.5. You use TRS type cables where the "ring" of the connector is the send to the effects unit and the "tip" is the signal FROM the effects unit.
Not all effects units have a TRS connection and they have only in's and out's. For this type you will have to make special cables that split the TRS at the PMP3000 into a send and receive to plug into your effects unit. These cables are NOT readily available usually and you have to make them yourself. Sometimes you can use a stereo splitter cable but these may have poor shielding for use in this purpose.
77 views
Usually answered in minutes!
×