Why my gerber tools doesn't have a blade? - Gerber Blades Multi-Plier 600 Needlenose

Try contacting gerber, it may be under warranty

[email protected]

they may fix it for free.

Hello. The correct way to remove and replace the battery would be to unscrew the end cap all the way. The Battery will then fall away allowing for a new battery insertion. The "plate" is not suppose to be removed (according to Gerber Blades). Hope this helps.

Hello. The "plate" is not supposed to be removed (according to Gerber Blades). The correct way to remove and replace the battery would be to unscrew the end cap all the way. The Battery will then fall away allowing for a new battery insertion. Hope this helps.

Hello. According to Gerber Blades, the correct way to remove and replace the battery would be to unscrew the end cap all the way. The battery will then fall away allowing for a new battery insertion. Hope this helps.

Hello. Your product should still be under warranty, (I believe most multi-tools are lifetime status) and warranty repairs are almost effortless. They have divisions globally, as I am unaware of your location - I am including the link to the North American site for contact information. If a different country is required, the customer service number would be your choice. Sorry I can't be of more assistance, but hopefully this will provide you with a solution. Thank You.

For warranty and repair:

http://www.gerbergear.com/index.php/service_and_support/cat_id/6

For contact:

http://www.gerbergear.com/index.php/page/contact_us

This is the link to the parent company, just in case you need to go higher on the ladder.

http://eng-ca.fiskars.com/Customer-Service

Hello. There is an authorized dealer located in the UK. However, they "cannot supply spares or parts for any Gerber Tool..." Since the parts you are looking for are advertised as replaceable by the Gerber Company, the cutters may not fall under the same category, so I think a phone call to these people ( 0845 0900 192 ) is at least worth a try. http://www.shop4gerber.co.uk/gerber_new.html
If they do not carry the replacement cutters, They say to "call the UK importer for repair or replacement : Please call SILVA, on 01506 406 277" - Finally, should you receive the run-around from these people, here is the link to the parent company, http://www.gerbergear.com/index.php/page/contact_us
use their contact information, and I'm positive they will be able to help. Personally, I would order in a few of these cutters, just to make all this worthwhile. Hope this has helped and good luck.

no need,send your knife to gerber and they will replace it.gaurenteed for life.

Gerber 600 replacement parts can be found on amazon. here: Amazon com Gerber 600 parts. I hope this was helpful. cheers

Call them and see what kind of warranty they offer. Tell them you're very upset and that you wont buy one of their products again. Maybe they will send you a new one.

return it...no one really likes on multi-tool products anyway