At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My EEE PC1015 PE keeps giving error message "Reboot & Select proper boot device of Insert Boot Media in selected Boot device & Press a Key." Also, beeps continuously for approx. 1-2 min then stops beeping but error message remains. Tried F9 several times to no avail. Entered setup, tried set up defaults, still same message. No manual or recovery disk available. Any ideas? A friend borrowed for night & returned to me like this & can't give me any clue about what caused this. PLEASE HELP!
Re: My EEE PC1015 PE keeps giving error message "Reboot &...
In situations like this you just must download the correct manual and reinstall the OS,if you have no disk choose a different OS some are virtually cost-free
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try booting to the Menu and Command prompt and Run the Command Prompt,once command prompt is open,type the following command and then press Entersfc /scannow
nota: there's space between sfc and /scannow
the problem is that it's lost or damaged the boot device,sometime is recover and fixing.
First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If it doesn't detect the hard drive then it could be faulty. Then the hard drive needs to be replaced in the computer/laptop, Windows installed and the computer or laptop's device drivers plus your programs etc. to get a functioning computer/laptop again.
It sounds like you have a bad hard drive. Make sure you don't have any CD/DVDs in the drive if that model has one and you don't have any USB devices plugged in at boot.
check 1st is there any memory card plugin or not if plug then remove and restart the system 2nd install operating system .. if same then repalce hdd.. thanks...
its basically telling you that your master hard drive with O/S installation cannot be found in the booting system...Check if your master HD is not corrupted and see if your O/S still exist or maybe wiped out..
I've read this problem due to new hardware interferences with desktop computers, all they had to do is change a few pins around on the harddrives.. since this is a laptop, and is quite difficult and dodgy to access the hardware, the only other suggestion is to reinstall windows with a recovery disk, or windows CD-ROM.
×