I can't open windows xp i got this message:\r\n"unable to read file C:\windows\system32\config\software " I tried to fix it thru recovery console copying the i386 file but nothing happenned Help me please

Solution 1
Requires some tech skills:

To complete part one, follow these steps:

1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
   Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp
   copy c:\windows\system32\config\system c:\windows\tmp\system.bak
   copy c:\windows\system32\config\software c:\windows\tmp\software.bak
   copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
   copy c:\windows\system32\config\security c:\windows\tmp\security.bak
   copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
   delete c:\windows\system32\config\system
   delete c:\windows\system32\config\software
   delete c:\windows\system32\config\sam
   delete c:\windows\system32\config\security
   delete c:\windows\system32\config\default
   
   copy c:\windows\repair\system c:\windows\system32\config\system
   copy c:\windows\repair\software c:\windows\system32\config\software
   copy c:\windows\repair\sam c:\windows\system32\config\sam
   copy c:\windows\repair\security c:\windows\system32\config\security
   copy c:\windows\repair\default c:\windows\system32\config\default
   
6. Type exit to quit Recovery Console. Your computer will restart.

Solution 2 Reinstall Windows Xp

Assuming it is windows XP here are the steps to fix that error:
To complete part one, follow these steps:

1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
   Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line:md tmp
   copy c:\windows\system32\config\system c:\windows\tmp\system.bak
   copy c:\windows\system32\config\software c:\windows\tmp\software.bak
   copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
   copy c:\windows\system32\config\security c:\windows\tmp\security.bak
   copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
   delete c:\windows\system32\config\system
   delete c:\windows\system32\config\software
   delete c:\windows\system32\config\sam
   delete c:\windows\system32\config\security
   delete c:\windows\system32\config\default
   
   copy c:\windows\repair\system c:\windows\system32\config\system
   copy c:\windows\repair\software c:\windows\system32\config\software
   copy c:\windows\repair\sam c:\windows\system32\config\sam
   copy c:\windows\repair\security c:\windows\system32\config\security
   copy c:\windows\repair\default c:\windows\system32\config\default
   
6. Type exit to quit Recovery Console. Your computer will restart.

My YouTube Channel
Click Here Live Tech Support

if it was running for more than 30 hours, it wasn't doing much. You can try copying hal.dll off of a known, good-working XP pc, and replace it with the one on your broken PC. It's better if you extract it from i386 folder but grabbing it from another pc should work fine.

If you need further help, reach me via phone at https://www.6ya.com/expert/brandon_bf4b4a06876c89a0

1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
   Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp
   copy c:\windows\system32\config\system c:\windows\tmp\system.bak
   copy c:\windows\system32\config\software c:\windows\tmp\software.bak
   copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
   copy c:\windows\system32\config\security c:\windows\tmp\security.bak
   copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
   delete c:\windows\system32\config\system
   delete c:\windows\system32\config\software
   delete c:\windows\system32\config\sam
   delete c:\windows\system32\config\security
   delete c:\windows\system32\config\default
   
   copy c:\windows\repair\system c:\windows\system32\config\system
   copy c:\windows\repair\software c:\windows\system32\config\software
   copy c:\windows\repair\sam c:\windows\system32\config\sam
   copy c:\windows\repair\security c:\windows\system32\config\security
   copy c:\windows\repair\default c:\windows\system32\config\default
   
6. Type exit to quit Recovery Console. Your computer will restart.

Note This procedure assumes that Windows XP is installed to the C:\Windows folder. Make sure to change C:\Windows to the appropriate windows_folder if it is a different location.

If you need more help come back.Post / thumbs / testimonial are welcome!

Hi, This normally means that a windows file from the system32 folder is missing or corrupt. You will have repair that by using your operating system cd and go to repair when prompted. If this does not work you may have to install a clean copy of your operating system.

kindly follow these steps:

1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
   Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp
   copy c:\windows\system32\config\system c:\windows\tmp\system.bak
   copy c:\windows\system32\config\software c:\windows\tmp\software.bak
   copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
   copy c:\windows\system32\config\security c:\windows\tmp\security.bak
   copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
   delete c:\windows\system32\config\system
   delete c:\windows\system32\config\software
   delete c:\windows\system32\config\sam
   delete c:\windows\system32\config\security
   delete c:\windows\system32\config\default
   
   copy c:\windows\repair\system c:\windows\system32\config\system
   copy c:\windows\repair\software c:\windows\system32\config\software
   copy c:\windows\repair\sam c:\windows\system32\config\sam
   copy c:\windows\repair\security c:\windows\system32\config\security
   copy c:\windows\repair\default c:\windows\system32\config\default
   
6. Type exit to quit Recovery Console. Your computer will restart.

Hope this helps. Please rate my response.
Thanks.
Have a good day.

it is nothing but windows registry error. do one thing in another pc download the Hiren's boot cd from internet, write that file in a cd, try to boot from that cd & repair the registry. otherwise just format the operating system & reload the OS.

To complete part one, follow these steps:

1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
   Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp
   copy c:\windows\system32\config\system c:\windows\tmp\system.bak
   copy c:\windows\system32\config\software c:\windows\tmp\software.bak
   copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
   copy c:\windows\system32\config\security c:\windows\tmp\security.bak
   copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
   delete c:\windows\system32\config\system
   delete c:\windows\system32\config\software
   delete c:\windows\system32\config\sam
   delete c:\windows\system32\config\security
   delete c:\windows\system32\config\default
   
   copy c:\windows\repair\system c:\windows\system32\config\system
   copy c:\windows\repair\software c:\windows\system32\config\software
   copy c:\windows\repair\sam c:\windows\system32\config\sam
   copy c:\windows\repair\security c:\windows\system32\config\security
   copy c:\windows\repair\default c:\windows\system32\config\default
   
6. Type exit to quit Recovery Console. Your computer will restart.

Note This procedure assumes that Windows XP is installed to the C:\Windows folder. Make sure to change it is a different location.

If you have access to another computer, to save time, you can copy the text in step five, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console: batch regcopy1.txtWith the batch command in Recovery Console, you can process all the commands in a text file sequentially. When you use the batch command, you do not have to manually type as many commands. Part two loadTOCNode(3, 'moreinformation'); To complete the procedure described in this section, you must be logged on as an administrator, or an administrative user (a user who has an account in the Administrators group). If you are using Windows XP Home Edition, you can log on as an administrative user. If you log on as an administrator, you must first start Windows XP Home Edition in Safe mode. To start the Windows XP Home Edition computer in Safe mode, follow these steps.

1. Click Start, click Shut Down (or click Turn Off Computer), click Restart, and then click OK (or click Restart).
2. Press the F8 key.
   
   On a computer that is configured to start to multiple operating systems, you can press F8 when you see the Startup menu.
3. Use the arrow keys to select the appropriate Safe mode option, and then press ENTER.
4. If you have a dual-boot or multiple-boot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

In part two, you copy the registry files from their backed up location by using System Restore. This folder is not available in Recovery Console. Before you start this procedure, you must change several settings to make the folder visible:

1. Start Windows Explorer.
2. On the Tools menu, click Folder options.
3. Click the View tab.
4. Under Hidden files and folders, click to select Show hidden files and folders, and then click to clear the Hide protected operating system files (Recommended) check box.
5. Click Yes when the dialog box that confirms that you want to display these files appears.
6. Double-click the drive where you installed Windows XP to display a list of the folders. If is important to click the correct drive.
7. Open the System Volume Information folder. This folder is unavailable and appears dimmed because it is set as a super-hidden folder.
8. Open a folder that was not created at the current time. You may have to click Details on the View menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. These are restore points.
9. Open one of these folders to locate a Snapshot subfolder. The following path is an example of a folder path to the Snapshot folder: C:\System Volume Information\_restore{D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}\RP1\Snapshot
10. From the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
    • _REGISTRY_USER_.DEFAULT
    • _REGISTRY_MACHINE_SECURITY
    • _REGISTRY_MACHINE_SOFTWARE
    • _REGISTRY_MACHINE_SYSTEM
    • _REGISTRY_MACHINE_SAM
11. Rename the files in the C:\Windows\Tmp folder as follows:
    • Rename _REGISTRY_USER_.DEFAULT to DEFAULT
    • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
    • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
    • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
    • Rename _REGISTRY_MACHINE_SAM to SAM

These files are the backed up registry files from System Restore. .

Part Three loadTOCNode(3, 'moreinformation'); In part three, you delete the existing registry files, and then copy the System Restore Registry files to the C:\Windows\System32\Config folder:

1. Start Recovery Console.
2. At the command prompt, type the following lines, pressing ENTER after you type each line: del c:\windows\system32\config\sam
   
   del c:\windows\system32\config\security
   
   del c:\windows\system32\config\software
   
   del c:\windows\system32\config\default
   
   del c:\windows\system32\config\system
   
   copy c:\windows\tmp\software c:\windows\system32\config\software
   
   copy c:\windows\tmp\system c:\windows\system32\config\system
   
   copy c:\windows\tmp\sam c:\windows\system32\config\sam
   
   copy c:\windows\tmp\security c:\windows\system32\config\security
   
   copy c:\windows\tmp\default c:\windows\system32\config\default Note Some of these command lines may be wrapped for readability.
3. Type exit to quit Recovery Console. Your computer restarts.

Note This procedure assumes that Windows XP is installed to the C:\Windows folder.

If you have access to another computer, to save time, you can copy the text in step two, and then create a text file called "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:
batch regcopy2.txt Part Four Click Start, and click All Programs. Click Accessories, click System Tools. Click System Restore, click Restore to a previous RestorePoint.

To complete part one, follow these steps:

1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
   Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.
2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.
4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.
5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line: md tmp
   copy c:\windows\system32\config\system c:\windows\tmp\system.bak
   copy c:\windows\system32\config\software c:\windows\tmp\software.bak
   copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
   copy c:\windows\system32\config\security c:\windows\tmp\security.bak
   copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
   delete c:\windows\system32\config\system
   delete c:\windows\system32\config\software
   delete c:\windows\system32\config\sam
   delete c:\windows\system32\config\security
   delete c:\windows\system32\config\default
   
   copy c:\windows\repair\system c:\windows\system32\config\system
   copy c:\windows\repair\software c:\windows\system32\config\software
   copy c:\windows\repair\sam c:\windows\system32\config\sam
   copy c:\windows\repair\security c:\windows\system32\config\security
   copy c:\windows\repair\default c:\windows\system32\config\default
   
6. Type exit to quit Recovery Console. Your computer will restart.

Here is the solution right from Microsoft.

 

SYMPTOMS
When you try to start or restart your Windows XP-based computer, you may receive one of the following error messages:

Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE

Stop: c0000218 {Registry File Failure} The registry cannot load the hive (file): \SystemRoot\System32\Config\SOFTWARE or its log or alternate

CAUSE
This issue can occur if the System or Software hive for the Windows XP installation is missing or damaged.

RESOLUTION
To resolve this issue, use one of the following methods.

Use the Recovery Console Tool
To restore a damaged registry hive, use the Recovery Console to restore the backup copy of the hive from the Repair folder. The Repair folder contains a copy of the system's registry hives that were created after the first successful startup of Windows XP.

WARNING : Although data should not be affected by the following procedure, you may need to restore changes you previously made to programs or system settings since the first time you successfully started Windows XP.

To replace the damaged registry hive and restore the backup copy of the hive from the Repair folder: Start your computer to the Recovery Console.

Determine if the file that is mentioned in the "Symptoms" section of this article is present, and if it is, rename it:

In Recovery Console, change to the c:\Windows folder.

Type cd sytem32\config , and then press ENTER.

Type dir system , and then press ENTER.

If you cannot run the preceding command successfully (because the file is missing), skip to step 3. If you can run the preceding command successfully, type ren system system.bak , and then press ENTER.

NOTE : If the message that you received referred to the software file, replace "system" with "software" in the preceding command. For example, you would type ren software software.bak (instead of ren system system.bak ), and then press ENTER.

Type copy c:\windows\repair\system , and then press ENTER.

NOTE : If the message that you received referred to the software file, replace "system" with "software" in the preceding command. For example, you would type copy c:\windows\repair\software (instead of copy c:\windows\repair\system ), and then press ENTER.

You should receive a "One file copied" informational message. For additional information about how to use Recovery Console during startup, click the article number below to view the article in the Microsoft Knowledge Base:
Q307654 HOW TO: Install and Use the Recovery Console for Windows XP

IMPORTANT : If you encounter problems when you run the preceding commands, you may need to use the Change Directory command ( cd ) one folder at a time before you run the preceding commands. For example, type cd system32 , press ENTER, type cd config , and then press ENTER.

Type exit , and then press ENTER to quit Recovery Console and restart the computer.