- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi
Carefully reading user manuals help in most of cases :)
Just use Read flash option. After reading complete, SagemEG will show you phone code. If not success, there is another option to get code - sent flash.bin to [email protected].Here is log of reset to default , read eeprom n read flash
Unless your camera is USB ready you may need to buy a video capture USB unit to make both unit compatable to you to download your shoots. You still need your sotware program as final cut basic or ? compatible with your mac.
What is extention of your eeprom file?
.sep? use UST Pro 2 or NSPRO.
Dear these files are used with special hard n software equipment.
You cannot do it with pc alone...
Several solutions for this problem.
-You can try to reposition the router in the room
- In the router set, change the channel from 6 to 7 or from 11 to 10
- Purchase a 9db-15db Wi-Fi signal booster antenna
- download the software from TP-Link
- download firmware upgrade from linksys
- download software http://www.download32.com/wireless-network-speed-booster-software.html
I did exactly the same thing!. This is how I fixed it. Use Updater.exe NOT WebUpdate. Download the latest firmware for your unit (the rgn file), then connect your nuvi via usb. Turn it on and hold the power button left, at the same time drag and drop the rgn file onto the Updater,exe. It will start automatically and reload the firmware over the corrupt one.
I would say that either the upgrade package is not compatable with your device and has not installed anything beyond flashing/deleting the current installed eeprom info (no info on the eeprom at all) or the device has been restarted or uplugged during the flash eeprom stage, the factory/master reset should take you back to config mode at least, when trying the master reset the power should be on, then activate the master reset with a paperclip or pin only will work, press and hold until the red light goes out, remove the pin or paperclip activator and your device should power up as normal with the old eeprom info or ready for new eeprom info to flashed onto it if you are successful here ensure you use the istall package that came with this device Should be WinMobile/II or IIe I think.
×