SOURCE: JVC GR DVL 9000 digital video camera
Manual says any message E01-7 is 'a malfunction of some kind'. Recommends remove the power supply, battery pack etc, and press the reset button. Wait for a few minutes for the indication to clear, then resume normal use. If it doesn't clear after 2-3 attempts, take it to your dealer.
SOURCE: JVC GR DVL 9000 digital video camera EO3 problem?
In the case no REEL FG is produced for 4 seconds
or more in the capstan rotation mode after
loading was complete, the mechanism mode
is shifted to STOP with the pinch roller set off.
This error is defined as [E03].
However, no REEL EMG is detected in the
SLOW/STILL mode.
1. The idler gear does not engage with the reel disk well.
2. Though the idler gear and reel disk are engaged with
each other, the tape is not wound because of overload
to the mechanism.
3. No FG pulse is output from the reel sensor.
4. No power is supplied to the reel sensor.
5. Tape transport operation takes place with a cassette
having no tape inside.
6. The tape slackens and no pulse is produced until the
slack is taken up and the tape comes into the normal
status.
SOURCE: I have a JVC mini
Plug in yourcord to a usb port. go to my computer and select the drive that the camera is pluged into. Then highlight the picture files and right click. a pull dow will show you rhe other drives, select C drive and poof they are gone to c drive. If it asks you where on c drive select my pictures
72 views
Usually answered in minutes!
×