I dont know how to use induction cooker.it has no numbers to reduce the heat.things will burn very fast

I THINK YOU HAVE REPLACED THE MOSPHET WITH LOW AMPERE LIKE 15N120 INSTEAD OF 25N120 OR CHECK CAPACITOR ON COIL.

try to unplug it and plug it back. Make sure that it is turned off first before you unplug it.

my problem is E6 code & 1 or 2 minutes automate stopping

Hi. Some steam is ok. But when it is running it should be sealed up. The little rocker should be doing it's thing too. Good luck.

Dear Sir i have an prestige induction cook top model PIC 3.0 the problem is that it displays an E7 error whenever switched on after appx. 1 minute and the food is not boiled /cooked. please let me know what is the problem How Can Solved this Problem This prestige induction cook top model PIC 3.0 Only one week so please do need full

thx... Kundan singh Rana Baddi (H.P.) 09857455945 [email protected]

There is a error message there, it indicate a problem with your induction cooker. It cause a defective winding wire or circuit controllers your know induction cooker works similar to the principle of electro magnet induction, it give heat to metal cooking pot. I hope I give you a idea regarding what happen to your unit.

Possible that the driver of the induction coils is short or damaged. You might need to remove the panel and check within to see the reason for the protect cut off.
If there is no other display on switch On then the circuit is faulty and a knowledge of power electronics is needed to probe into the circuit.

We have a Prestige Induction cook-top Model PIC 3.0. It gives the error "-- -- -- --" and a beep when the power is turned on. Can anybody help. My email is [email protected]

Stainless steel (or Aluminium) cookware will not normally work with an Induction cooker: Induction cooker need cookware that have a certain amount of metal especially at the bottom of the pot or pan.

An easy way to check if the cookware is suitable is to use a small (fridge) magnet: if it stick to the pot/pan then it is very likely that the pot/pan is suitable for induction 'magnetic' cooking!

Hope my small hint is of assistance and if so, vote accordigly!

this could be a number of things, fuses, megortron, capacitor,
but what ever it is dont try to fix it yourself there is over 1000 volts kicking about inside it and if you tuch this your going to grow wings prity fast, have you ever seen a stun gun working? well inside your microwave it there very big brother!!!! but it dont stun,,, it kills
look at it this way,,, whats your life worth in £????? play it safe,,, call a guy in to fix it for you, ok