1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
"C" key AUTO/TEXT/PHOTO key
"C" key AUTO/TEXT/PHOTO key
Main code Start key Sub code Start key
(Note:Perform the first four key strokes quickly allowing no more than one
second between key strokes.)
If the machine dies enter 14 then press start. the machine will reboot normally.
If not contact service centre
Error H4
"C" key AUTO/TEXT/PHOTO keys HOW IS FUNd
Thanks a lot.
It worked for me.
Fine.
Thanks a lot Once again.
1,574 views
Usually answered in minutes!
error msg turns to CH
×