At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 5K gas generator on our boat, its 8 years old runs great till today. It will only run with the start button pushed in. When I release it the engine stops.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 8:17
https://www.youtube.com/watch?v=6esHkPyygWw
Sep 6, 2011 - Uploaded by mainblind
How to make Generac generator run bypassing the low oil sensor and ... Great video on low pressure warning switch removal and ...Pulled off the shroud over the sensor. ... It wouldn't start so I replaced the spark plug, gas, and oil - then it did as yours. ... 1200 Watt Generator Won't start - Duration: 14:49.
Apr 16, 2014 - gasoline engine on portable generator won't start what do I need to do ... PULL, Take OUT the spark Plug , make certain it is clean and DRY and then start allover again. ... start then when talking pulling rope use electric starter - if won't ...several times till starts, moving choke to OFF or RUN position once it ...
SOUNDS LIKE THE CARB LOW SPEED JETS ARE CLOGGED , THANKS TO THIS PITIFUL GAS WE GET TODAY ,I USE A ADDITIVE CALLED SEA FOAM IT WORKS GREAT JUST ADD TO FUEL EVEN WORKS FOR WINTER SET UP TOO
a stuck float in the carb can cause this as well as old gas do to schlack build up from gas evaperating the carb should be removed and cleaned with carb cleaner and old gaskets replaced a carb kit will run about $20.00 and avail from small engine shops.
the engine number will be needed for the right kit at the bottom of the engine where it mounts there is a flat boss with a number stamped that will be needed for parts.
when the engine is stored the best thing it to run the engine and shut off the gas and run till it stops this will get ride of the gas in the carb there will still be a small amount left in it but follow recommended long term storage prep from the manufacture. hope this helps
There is a problem with fuel flow or carbueration. I would look for plugged fuel filter (sometimes within the gas tank, or a stuck float level, or possibly even plugged jets..
First you want to look at the pilot nozzle. from the very end it should appear to be "8" shaped. If this is not the case than the nozzle must be replaced. This pinch in the center end of the nozzle is the restricter and allows for an even flame to the thermocouple. There are adjustments for the volume of gas to the nozzle but they should not be changed from the factory default settings. Thank you, Dana
×