How do I connect an ipod to OMT 1015 without buying an ipod conversion kit? I read that you can connect it with mini-jack to spare amp input. How do you program it as BGM? I don't want to mess it up. Thanks

If you google for "cd jukebox parts" you can find a list of suppliers of all kinds of jukeboxes. You check with a few that work for Wurlitzer and I think you can find what you need.

The iPod should play automatically if plugged into the docking bay. There is a design fault which means the cable on the back of the docking bay gets dragged out if the title rack is dropped down. Check the cables and push them home.

The best way is to use a 3,5mm stereo jack to 2 RCA cable like this:

You can easily find one like this at your local audio/electronics shop or buy one on line. You have to connect the RCA at any free stereo input at the back of your Pioneer (like aux or cd). Take a look at this picture:

After this you can use the 3.5mm stereo jack for connecting not only your ipod but every mp3 player or other device has an earphone jack. Just plug the 3.5mm jack at the earphone jack and rise the volume at the portable device up to the middle of the volume range and set your Pioneer input selector at the stereo input that you connect the 2 RCA before (aux or cd)

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

If it uses a K99 amp you can buy an iPod docking bay as a kit to fit to the juke. If it is a Compact I84 amp you can't.

To connect an IPOD to a Wurlitzer, you need a background music adaptor (BGM). I have these available, both new and reconditioned. Also, if your OMT is new enough, a complete kit to mount the IPOD on the front of the machine is availble also. Please email for more information, [email protected].

Hello

You need a cable which goes from RCA to mini jack. The mini jack goes into your ipod and the RCA cable goes into the back of the amp under input heading. Then you just need to set the amp on input via remote or manual and you should be set. Please rate this.

Best regards

Hello

Yes you can do that, you just neet to buy or build a certain cable which goes from rca to mini jack. Plug the rca heads into the back of the amp or playback device as an input. Plug the mini jack into your ipod and set the amp on input. It should work perfectly.
Please rate this.

Best regards

Hi,

i have the 1015 OMT Ipod edition. It works just how you say however mine has the BGM module. The ipod is plugged in as back ground music. The BGM module then swithes the input over to cd when someone selects a disk

you have to buy the ipod connection kit to pioneer, but if your deck have RCA input at the back..all you need is Y cable 2 (RCA male - 35mm jack)

RCA will be connected to DECK, 35 mm jack to your ipod.

to use your ipod...change the input setting on your deck to AUX (auxillary) most deck have this for CD Changer connection

Good Luck

Find the input wires (red and black phono plugs) going in to the side of the amp. Unplug them and play a record. Put a paper clip in the socket and if you get HUMMMMM the fault is the cartridge or wires. If you dont...then it is the amp.