How can i get the total number of pages scanned by my Canon 9080C scanner

Depressing the red STOP button for approximately 5 seconds should clear the counter displayed on the control panel. The Total scan count for the machine (located under "Control-Panel, Scanners & Cameras, Canon 9080, right click & select properties) can only be reset via the service diagnostic utility.

The problem is probably in your scanning software, you have to tell it if you want to scan legal size, and if you leave it set for legal all the time it might put dark bars under the letter size docs. It depends on the version of software on your computer.

Sounds like you need a new CIS unit, the scan assembly or its lamps are flickering.

There is a paper sensor just under the rolers in the lifting tray. Clean the area thoroughly with a damp cloth. Keep some sheets and try ]count only'. If it works then the sensor is okay, then you can try your scanning. If it is not sensing paper, check the sensor or connections to the sensor.
S. Mohan, India

THe scan count is available in the control panel (under scanners...) and if the user is a non-administrator, he/she cannot reset it.
Canon 9080C permits installation of a mechanical counter inside the scanner. This can help you track the scanned quantity.
The way your question is detailed, I am sure you must be aware of these facts!
S. Mohan

I have two of these scanners the only way that i have found round this is to scan the pages duplex then remove the unwanted afterwards!

I have the same model Canon DR-9080C scanner which I recently acquired and I'm trying to figure out how used it is. I see many referrign to a counter. I see the big LCD on top front, but how do you know how many total pages have been scanned through it? I read somewhere there is a mechanical scanner. Is this true?

I have the same model Canon DR-9080C scanner which I recently acquired and I'm trying to figure out how used it is. I see many referrign to a counter. I see the big LCD on top front, but how do you know how many total pages have been scanned through it? I read somewhere there is a mechanical scanner. Is this true?

to check the page count install the driver and setup the scanner as a "scanner device" on your computer. Once you have done that , go to the "control panel" than "scanners and printers". Right-click on the device that says "Cannon DR-9080C" and select "properties". The device information will appear, than select the "counter" tab on the information box; the scan count will be listed.

I have the same model Canon DR-9080C scanner which I recently acquired and I'm trying to figure out how used it is. I see many referrign to a counter. I see the big LCD on top front, but how do you know how many total pages have been scanned through it? I read somewhere there is a mechanical scanner. Is this true?