At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Nady Ht-duo cordless microphone, new 9 volt battery. Red battery light should stay on, but comes on then goes out. Checked contacts, no problem there.\r\n Thanks,
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The red light indicates a dead battery. Test the battery with a volt meter, to make certain you do not have a bad battery. Even if the battery was "new", it still might be bad. If that does not resolve the problem, contact Shure to have receiver repaired.
Very likely source of this problem is the "mixer out/amp in" jack on the back. Anything plugged in there breaks the signal path so, obviously any off board equipment plugged in there needs to be checked...but that jack itself could be faulty or even just dirty. If there is nothing plugged into it....you can get a phone plug (power off) and plug in and remove it a few times. This is a switching type jack so if the "switch" part of it isn't connecting with nothing plugged into it, the signal path would be broken and give you the results you've been having.
Hi, nady ht-3 mic transmitter uses a 9 volt battery ..
To insert the battery, You will need to unscrew the below button part of the hand held mic (anti-clockwise), and after unscrewing, you will see the space to fix in the 9 volt battery..
When you buy the battery,before fixing the battery in, check the polarity before placing the battery in (positive + and negetive -)...After inserting,screw back the cover in and locate where the power switch is..It always has an indicator to know if the power is on...
Note..make sure the Transmitter is on for it to be able to work properly with the hand held microphone....
Sounds like the onboard power curcuit shorted out. Send it to Nady Systems for repair.It might be cheaper to send it to your local electronics repair shop but i guarantee you will lose the quality of the sound if you do.
×