Need the Windows version of the hp psc 1300 series psc 2400 photosmart series hp officejet 5500 series disk

HP "series" numbering can be somewhat confusing, but Windows 7 does have the correct driver for your printer.
For the HP PSC 1350, you will need to use the 1300 series driver.

The 1310 series driver is for models numbered 131x (e.g., 1315, 1318).

You can download the HP printer drivers from their supportWEB site. Please click on this link and
select your model printer to download:- http://welcome.hp.com/country/us/en/support.html

Hi there,

Here is the direct link on where you can open and save the manual to your computer.

HP PSC 2400 Photosmart series All-in-One - (English) Setup Poster

HP PSC 2400 Photosmart series All-in-One - (English) Reference Guide

Hope this helps you, Ezzyriders!

Here you go:

Compatible Part No:

• HP 0957-2094
• HP 0950-4466

Compatible Printers:

• HP OfficeJet PSC 1350
• HP OfficeJet PSC 1355
• HP OfficeJet PSC 2410
• HP OfficeJet PSC 2410xi
• HP OfficeJet PSC 2450
• HP OfficeJet PSC 2510
• HP OfficeJet PSC 2600
• HP OfficeJet PSC 2610
• HP OfficeJet PSC 5510
• HP OfficeJet PSC 5510 all in one
• HP OfficeJet PSC 5850
• HP PhotoSmart 1315 all in one
• HP PhotoSmart 2510
• HP PhotoSmart 7960
• HP PhotoSmart 7960w
• HP PhotoSmart 7969
• HP PhotoSmart PSC 2510
• HP model numbers Q3435AR, Q3435A, Q3501A, Q3087A, Q3090A, Q3094A, Q3020AR, Q3020A, Q3023A, Q3024A, Q3021A, Q3022A
• HP Bundle PSC1315+M307 Q5776A
• HP OfficeJet 5500 Series All-in-One Q3434A, Q3435AR, Q3435A, Q3435P, Q3436A, Q3437A, Q3438A, Q3440A
• HPPSC 1300 Series All-in-One Q3492A, Q3493A, Q3495A, Q3500A, Q3501AR,Q3501A, Q3502A, Q3503A, Q5532A, Q5534A, Q5763A, Q5765A, Q5766A, Q5767A,Q5768A, Q5769A, Q5770A, Q5771A, Q5772A
• HP PSC 2410 PhotoSmart All-in-One Q3087A, Q3088A, Q3089A
• HP PSC 2500 Series PhotoSmart All-in-One Q3094AR, Q3094A, Q3095A
• HP PhotoSmart 7900 Series Printer Q3020AR, Q3020A, Q3021A, Q3022A, Q3023A, Q3024A Q3090A

For HP 0957-2094 PhotoSmart 2410, 2510, 5510 Printers and much more.Come with power cord. Power Rating: 32V 940mA and 16V 625mA
Note: Amps and Watts are maximum load tolerance. Devices only draw as many Amperes or Watts as they needed

For purchasing you might also contact this link below:
http://cgi.ebay.com/Adapter-For-HP-0957-2094-0950-4466-32V-940mA-16V-625mA_W0QQitemZ250414311173QQcmdZViewItemQQimsxZ20090427?IMSfp=TL090427149005r21586


Hope you like my info

Step one: Uninstall the All-in-One software Even if the installation failed, some HP software components might have installed on the computer. Follow these steps to use the Windows Add or Remove Programs tool to uninstall the software.

1. Disconnect the USB cable from the product.
2. Click Start , and then click Control Panel .
3. Click Add or Remove Programs . The Add or Remove Programs window opens.
4. In the Currently installed programs list, select the following items if they are listed:
   • HP Officejet/Photosmart/PSC All-in-One software 9.0
   • HP Imaging device functions 9.0
   • HP Customer Participation program 9.0
   • HP Solution Center 9.0
   • HP Photosmart Essentials 9.0
   If the list of installed HP programs contains any version numbers less than 9.0, select the following items if they are listed:
   • HP Officejet/Photosmart/PSC All-in-One software XX (where XX represents a version number less than 9.0)
   • HP Imaging device functions XX
   • HP Customer Participation program XX
5. Click Change/Remove , and then follow the on-screen instructions to uninstall the software.
   NOTE: If a prompt displays asking you to remove shared files, click No . Other programs that use these files might not work correctly if the files are deleted.
6. Restart the computer when prompted to do so.

Hello,

Unless that disk has drivers for other operating systems on it that would probably be the issue. However, you can download the correct drivers for you model here.

In step one click "Download drivers and software (and firmware)".
In step two enter your exact model number and press enter. If you dont have the exact model it will listed the closest choices for you. Once you have that you can choose the exact version you have.

Click your operating system.

NOTE: If your particular model doesnt have Vista drivers available you will be sent to a link with workarounds provided by HP. If this is the case you can ignore the following step.

Then click the link under driver to start the download of the driver that you chose.

Once downloaded, you can double click the file to start the installation.

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductRoot.jsp?lang=en&cc=us&taskId=135 this site will get you what you need

Windows Vista will automatically recognize the printer if you plug it..

for more information please read the article from HP
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=c00808543

hp director

The OKI 5200 is a 'GDI' or Windows only printer and does not support PCL or PostScript languages.
Most if not all of the printers listed support either PCL or PS or an inkjet based language.
I'm afraid you will not be able to print the the 5200 without it's driver loaded on the PDA.
If the 5200 supported PCL you would be able to choose any of the
Color HP Deskjets.