At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
There should be just some sort of snaps, or hooks holding the guard on. I have yet to see a fan that doesn't. but if there is any, take the clips off of the guard, and clean the blades.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
How to clean the Fanaway Fan It's very easy to clean the blades of the Fanaway fan, simply pull the blades out when the fan is turned off. You need to hold onto two blades and slowly pull them out in the same direction that the blades would usually open, the mechanism is fairly tight so you need to use a bit of pressure to pull them out. Make sure you pull both two blades at the same time as pulling one could cause damage as the pressure is too much over the 1 blade. Once you have them out you can wipe them down with warm soapy water or Windex on a cloth.
I have had good results using a product called Scott's Liquid Gold. It's available in many stores including grocery stores. I started using it to clean up console televisions after repairing them. Make sure you wipe it clean after using it. The residue will attract dust if you don't. It's sort of a "super Pledge"
The fan blades have to be balanced for it to run smoothly. This website looks like it's straight from 1995, but the instructions are good and you should be able to rebalance your fan without too much trouble.
This would seem to be the motor heating up and cutting out on a thermal overload. Check to see if the motor area is clean and that the fan blades are clean. To clean the motor you can blow compressed air through it. To clean the blades disassemble the cover remove the blade and clean with a mild soapy solution.
I used a can of compressed air to clean my fan blades and this did the job. I bought a 6-pack of 3M Dust Remover at Sams Club to save money. Hope this helps.
×