Telephone number for inbound call not showing up

Inbound marketing describes marketing tactics and methods which are about drawing potential clients along with valuable information and content.

try reseting the phone by unpluging it and also removeing the batterys. Il check the manual.

Jane, it would help if you let us know what phone make and model you have. If it's a recent android phone then under phone click on recent. there are all of you recent activity. The arrow tell if it is a inbound or outbound phone call.

Does this happen on all inbound calls or just some?
If this is on all inbound calls...Sounds like Do not disturb is turned on. Most uniden's have a DND (do not disturb) mode. Try turning this off and see if that helps.
Using Do Not Disturb

• The Do Not Disturb or DND feature turns off the audio ringers of the base and all handsets at the same time. It does not affect any of the visual ringers.
  
• With the phone in standby, press and hold Do not Disturb on the base. The phone automatically turns on the answering system and shows Do Not Disturb in the display on all handsets.
  
• To cancel, press Do not Disturb.

If this is not the issue, it may be turned on at the central office (your phone company) try using the DND activation/deactivation code of *64 from your phone.
If this is just on some inbound calls...Then it you may have anonymous call rejection turned on. That feature blocks calls from people that block their calling number when placing calls.

Analog Panasonic phones have one "ring tone". You program it to ring or not ring, but the tone is exactly the same. Ringing programming is in SYSTEM programming in the 40x's, depending on the cabinet. In a TA series, inbound ringing is program 408 409 and 410.

Carl

It does have caller ID however you need to check that your call carrier is supplying inbound CLI. check on your handset that it is set to show this by pressing TRANSFER 119 then use the volume key to set it to show name or number first. check out http://www.abbeytelecom.com it has loads of Samsung DCS programming and training videos, I posted one as a example for you

If the fax machine you send the faxes to is set not to show the ID (telephone number) it will not show the tellephone number in the activity report.If you use a telephone conected to the fax and you dail a number from the handset it will aslo not display a id on the activity report.

Unplugged the phone for 60 seconds, then plugged it back in.. all fixed...

Does feature 983 still show as an inactive feature? You need to reinitialize the feature codes if the system was reset.

Please post what is currently happening.