PLEASE HELP!!! I have two CDs stuck in one slot of my Blaupunkt IDC-A09 5-disc CD Changer, how do I remove them without breaking the changer? I don't really care for the CDs but I don't want to damage my changer...

code is 9841

The head unit needs reprogramming with planet to accept the CD changer....... a main dealer or any good local garage should be able to help you with the software needed.

Hi, I know this is an old post, but I'll reply, so that other readers may get the benefit of my answer.

2004 was the year that Peugeot/Citroen changed from VAN bus to CAN bus wiring on their stereo's. If your car is before or early 2004 you will need the IDC-A09 blaupunkt in dash changer, which should just plug in and work straight away.

However, If your car is later 2004 onwards you will need the IDC-A04 Blaupunkt changer which will plug in and power up, but will not work properly untill you go to a peugeot dealer and they hook up some diagnostic software to tell the car a changer has been added. Both the IDC-A04 and A09 changers look identical.

I would say that you got the wrong changer, as the IDC-A09 changers in pre/early 2004 should just plug in and work.

Remember: Pre 2004 cars need IDC-A09 (plug and play) and Post 2004 cars need IDC-A04 changer (get pug dealer to reprogram cars computer)...its a costly mistake if you bought the wrong one!

Hi try unpluging both the cd and the head unit from power for 30 mkins or more. this should reset the system. plug the head unit in 1st then the cd.

regards

Mark
www.blueice-electronics.co.uk

hi whats your email?
will email you.

mark

hi you nhave a faulty u8nit. there is a repair kit, but its not easy to fit, please see: http://carradiospares.co.uk/repair-8619001490-p-256.html


Mark

hi there is a repair kit for this unit.
please see: http://carradiospares.co.uk/repair-8619001490-p-256.html


mark

hi the A09 has to be married to the head unit, unless your model is the A09 PSA.

Mark

THE IDC-A09 CAN BE REMOVED BY INSERTING THE STANDARD PHILIPS REMOVAL KEYS INTO THE TWO HOLES EACH SIDE OF THE UNIT AND FORCING THEM OUTWARDS SLIGHTLY AND THEN THE UNIT SHOULD SLIDE FORWARD

Hello ph1l1p, You are going to have to open up the unit and manually remove the disks from the carriage which I believe is loaded in a linear fashion. Once the disk are removed see if the unitr powers up and test the functionality of the CD changer. The stuck CDs may be the problem, but if they are not, check the power supply starting from the fuse. If you do not have a background in electronics please take the unit to a shop for repairs. Thank you, Shuttle83