SOURCE: installing part
there should be a clip half way up the back and on the top. release those and the old tub should come out with out to much difficulty. the peice that attaches from the feeder arm to the lower spray arm turns clock wise and lifts out. the lower spray arm will unscrew if you use a pair of pliers.
SOURCE: Whirlpool Dishwasher detergent door not
if the old dispenser relay was melted or damaged replace control bd the power for the dispenser relay comes from main control and should only be at dispenser when called for in wash cycle ..the control bd is keeping the relay energized too long causing melt down
SOURCE: Whirlpool dishwasher float 'assembly' model-DU810SWPQ2
Enter your model number into a site like partselect.com to get a parts diagram for your dishwasher so that you can see what the part looks like. The float just extends through the base to close a micro switch so the dishwasher shuts off the inlet water valve.
http://tclaundryrepair.com/
SOURCE: The bottom spray arm gets jammed in lower dish rack.
I would unscrew the cap and remove the whole thing... you might have something clogging one side, which makes more water come out on one side than another, causing it to wobble... or you may find something else causing the problem.
If there is a blockage, clearing it out can be tricky. really long pipe cleaners work well. Craft stores have them.
306 views
Usually answered in minutes!
×