Cold water is very slow filling the washing machine. Hot water works great.

SOURCE: washing machine no cold water

chnge your water valve or your cold water hose. something could be blocking up your hose. also when you ask machine for cold water does the machine hum? if so check to see if cold water is on. if the water is on then replace your water valve.

SOURCE: kenmore washing machine 80 series

check for kinks in the pipe or restrictions to the flow in the pipes before it gets to the washer, if all is ok then check the filter on the outside of the water connector on the machine for dirt

if you confirm all is clear and the flow of water is not the problem before the machine, replace the cold water solenoid

SOURCE: Kenmore wash macine

its in your cold water line valve to the washer if it works good with hot water the valve are incoming line being blocked when you turn it on the pressure comes in fast then when pressure is gone water slows down so when its off the pressure builds back up it runs fast then slow

SOURCE: Slow cold water fill in washing machine

Take out the screen on the cold water side of the fill valve where the hoses attach, its probably clogged.

Mike Price

• 744 Answers
• Posted on Jun 23, 2009

SOURCE: Cold water wash very slow fill up

Hi, you have a blockage on the cold side of your inlet valve, take the hose off on cold side of the valve and inspect screen..You may find some debris. If no debris is found you may have a bad valve..your going to need to replace it...if you have any questions please don't hesitate to contact