- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Nice Australian cooker but an unknown make to us here in North America.
Clocks always flash when you cut the power to inform you that the clock is incorrect. Perhaps you had a power cut in the night. If you have tried to set the time and can't, you may have a sticky button.
the key fob? or radio remove or what?
remote to what.
the operators manual covers this , under car keys.
the car came with 2 Fobs. lost them both now>?
RKE its called, (makes looking fact more easy)
is this car with SKIS Immoblizer option> yes./no
if yes.
SENTRY KEY IMMOBILIZER SYSTEM - IF
EQUIPPED
im reading your operators guide now.
lost that too>?
Duplication of keys may
be performed at an authorized dealer (or locksmiths) or by using the
Customer Key Programming procedure.
DIY, takes 1 key , good, called a valid key, in the below text.
You can program new keys to the system if you have two
valid keys by doing the following:
1. Cut the additional Sentry Key Transponder blank(s) to
match the ignition switch lock cylinder key code.
2. Insert the first valid key into the ignition switch and
turn the ignition switch ON for at least 3 seconds but no
longer than 15 seconds. Turn the ignition switch OFF and
remove the first key.
3. Insert the second valid key and turn the ignition
switch ON within 15 seconds. After ten seconds, a chime
will sound and the SKIS indicator light will begin to
flash. Turn the ignition switch OFF and remove the
second key.
4. Insert a blank Sentry Key into the ignition switch and
turn the ignition switch ON within 60 seconds. After 10
seconds, a single chime will sound. The SKIS indicator
light will stop flashing, turn on for 3 seconds; then turn
off.
The new Sentry Key has been programmed. Repeat this
process to program up to a total of 8 keys.
did i guess right, the Key FOB RKE,
remove key entry fob.?
If you are having issues with the flash not firing due to the 'thermal indicator' coming on, simply turn the thermal indicator off in the settings panel and all should be sweet.
Hi there remove the memory card and reset the camera. Now turn on the camera with out the memory card and make the camera flash light ON mode and take a snap. If the flash not working after this setting, then you need to replace the flash tube. The flash tube is cut off and thats why its not working.
It's the left button <, pressing it turns flash on and off. If the battteries are low it won't turn on. Here's a link to the online manual for your camera.
flashing purple after you hold it for 3 seconds is discovery mode. blue flashing is active on. hold for 6 seconds to turn off. hold for 2 seconds to turn on.
Hiya this is how i got mine to work.Manually turn on the tv. Press and hold setup on your remote till the light comes on and stays on. Then press the tv button then release. The light will flash then continue to stay on. Now press and release the power button waiting 2 seconds before you press it again until your tv switches off.. you may have to press it for awhile. Once your tv cuts off press the mute button and now your remote is set for your tv.
×