The power is on the cycle light is on but on the right the first two lights are flashing together. help zanussi aqua pulse de 6744 s

Width 60 cm
Height 85 cm
Depth 55 cm

https://www.google.com/search?q=Zanussi+Aqua+cycle+400+dimensions

..

Got a zanuzzoe Electrolux. Aqua cycle filter button is orange won't reset

Most likely your dishwasher finds fault.

Appliances without a display will show the alarms by a number of flashes of the LED "end of cycle".

For example: one flash = i10, two flashes = i20
..........and so on

So, count how many times LED "end of cycle" flashes and you will know the error code.

Dado

You need to go on line to the Zanussi web site and request the error codes for this machine. Once you know what the problem is you can pose a question!

You probably have either a bad powercord, motor or control panel.

if you can get the front plate off you will probably notice that the drum stabilizer roller has either fallen off or is damaged. This part is replaceable and should be no more than 20 bucks.

HI. After me fiddling about with the machine,checkingto make sure water was available to it and trying to locate the float switch (whicu i didnt) .
Then i left it standing overnight aqnd the believe it or not it worked in the morning.
I let it run through the cycles of a program which it did ok.
Hoping it carries on ok. Kenethyorky

REPLACE WATER INLET SOLEENOID

Tarvi...I don't know what the problem is...hard to diagnose these things. If the unit is working correctly, I suggest that you simply cut the power for a few minutes and then restart it. That may clear our a trouble code.

This is for the right model, but is the UK version, all should be the same but power supply details might differ if you are in US etc. http://www.serviceforce.co.uk/pdfs/U23297.pdf Hope this helps :)