Hi, I cleaned the air filter on the Hitachi CP- RX60 projector and followed instructions on the resetting of the timer. Using the remote it jumps (in the menu) out of the cancel mode to sub menu and it will not let me high light the reset. There is no reset on the projector itself. How can I clear the air filter message when I start up the projector?
How can I reset a lamp timer after replacing a new lamp in a hitachi cp-s335 multimedia projector, or where is the reset switch located?
If you do not have a remote here is how to reset the filter time. Use the "Menu" bottun to get the "easy menu" to display. Push the down arrow until you get to "Filter Time," then push and hold the RIGHT arrow to reset the filter time. DO NOT try to reset using the "Reset" option on the easy menu, it will not work.
Hitachi CP- RX60:
Press the RESET button on the remote control or the right-pointing triangle button on the projector for about 3 seconds. Once you see the RESET dialog, use the upward-pointing triangle to RESET. I can't see what you are or are not doing...so please see page 39 of the user's manual (download found below)
Source:
http://www.aboutprojectors.com/Hitachi-CP-RX60-projector.html
Hitachi-CP-S335 :
"The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the use time of the lamp. Pressing the RESET button on the remote control for about 3 seconds displays a dialog. To reset the lamp time, select the RESET option using the (triangle) button."
Taken from pg 36 of the users manual (download link below)
Source:
http://www.aboutprojectors.com/Hitachi-CP-S335-projector.html
5,294 views
Usually answered in minutes!
I can't reset the filter or the lamp...nor can I do a "factory reset." I have used the manual instructions and it still won't work.
Thank all, i'm done successfully.
×