Problem with radeon 9200 graphics card

http://support.amd.com/us/gpudownload/Pages/index.aspx

Hello sir

Try installing a older version of driver..

Or downlaod Driver sweeper through google and clean your ATI drivers and then try again..

You can go directly to the ATI website and download the catalyst driver. This will give you the most up to date driver available. If you get a message saying "your model computer must be updated from the manufacturer" you should go to your computer manufacturers website and install the video driver from there. Please provide your computer model for further support.

Good Luck,

NOLA Tech

find your driver from these site
1) nodevice.in/driver/Radeon_9200/get34922.html
2) www.nodevice.com/driver/Radeon_9200/get34922.html
3) www.driverskit.com/freedownload/.../Ati/Radeon_9200.../10463.html
4) www.driverfiles.net/.../ATI/RADEON-9200.../download/page,sh,22643,254,5,.html -
5) www.opendrivers.com/driver/.../ati-radeon-9200-9100-driver-6.14.10.6414-win2000-xp-free-download.html

I's sure it is if you have the requirement to run this game. Include also 1GB Memory or up.
You need to install all the required support program to run this game, like DirectX9.0c and Microsoft Runtime SDK 6.0 or up version.

According to the 9200 specs, 1680 x 1050 is not listed as a resolution option. It does list 1600 x 1200 The link below will show the specs for your video card.
Radeio 9200 Specs

Uh oh. It looks like you're out of luck.

FIFA 09 PC Requirement (minimum):
Graphics: 6600 Nvidia graphics card or ATI equivalent with support for Pixel Shader 3
DirectX Version: DirectX 9.0c"

Nvidia 6600 came out at 2004 and it supports DirectX 9.0C (Shader 3 came with 9.0C)
ATI Radeon 9200 came out at 2003 and only support DirectX 8.1 (which support shader 1.2 - 1.4)

Nope, Radeon 9200 will not support Shader 3 (neither will it support 2.0).

Time for a new video card maybe?

I hope this answers your question.

Please go into the BIOS of the system and Set the BIOS as default

1. Restart your computer.
2. When the computer first starts, it performs the power-on self test (POST). This test checks that all connected devices are functioning. As part of the POST, the memory is checked. During the memory test, a message will appear that tells you how to access the BIOS. For example, you may see the following message or a similar message that explains how to start the BIOS setup: PRESS DEL TO ENTER SETUPIn this example, you must press the DEL key immediately after the memory test is finished to start the setup process. You may have to press the key several times to make sure that you access the BIOS setup.
   
   Tip There are other keys that may provide access to the BIOS. They include the following:
   • F1
   • F2
   • F10
   • CTRL+ENTER
   • ALT+ENTER
   • CTRL+ALT+ESC
   • CTRL+ALT+INSERT
   If you are not sure how to access the BIOS setup, see the user manual for your computer's motherboard.
3. Look for the Set BIOS as Default settings. You can usually use the arrow keys to move through the menus and settings.

Do that and then try to

Regards

AlanChong20, update you're video casr software. The radeon 9200 last update is listed at this link.
http://ati.amd.com/support/drivers/xp/radeon-prer300-xp.html
The date for the upgrade is Nov. 15, 2006 No more driver update are being made.
If you're game still gives you the same error try lowering the game graphics detail settings. If set to high, bring them down to medium. It very possible you're card does not have enough memory to play the game. The 9200 is a older card. It may be time to upgrade.

Mike

http://www.driverfiles.net/Video-Adapters/ATI/RADEON-9200-SE-128MB-Ram/download/page,sh,22643,254,5,.html
download and install it