Driver WANT WINDOWS 7 COMPATIBLE DRIVER FOR BELKIN F5D7000ak CARD

You have to download and install the driver for windows 7 ..To do that you should access the support site of the manufacturer..If they have no driver for it ..it means the device is not compatible with windows7 or the driver was not issued yet ..(In this case try the driver for Vista ..should work OK )
http://www.belkin.com/support/

No, this product is not compatible with Windows 7 - 64 bit. It is compatible with Vista 32 bit computers. however u have a similar adapter which is compatible with Vista 64 bit, and Windows 7 - 64 bit you can use part F5U257 (USB-to-Serial Adapter).

I had the same issue myself. I purchased this device (that has Windows 7 drivers) - http://www.amazon.com/Keyspan-USA-19HS-Hi-Speed-supports-Sequence/dp/B0000VYJRY

Go to the manufacturer website and type in the make and model number and you will get this information

Here is the driver download LINK.

There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

v

If you are using an older Belkin Networking product, you may not have support for Windows 7 with your current software.
Software updates will be posted as they become available. Please check back if your product is not currently supported.
Some updates may still be in the process of going through Microsoft's official certification program. Although they have been thoroughly tested, they may present a warning message when the driver is being installed. These drivers will install on 32 bit operating systems but not on 64 bit systems, which is the normal and expected behavior.
Even though your product may currently not be supported under Windows 7, it may very well work on it; in the majority of cases, software and drivers for Windows Vista will work on Windows 7 without a problem.

If you need more help come back.Post / thumbs / testimonial are welcome!

the error code 10 says that the device cannot start...for this purpose you need to remove the driver completely and re-install it again...check on www.belkin.com/support for driver support and latest version of drivers...you can also install the driver for windows 7 in compatibility mode...
right click on the downloaded driver file and go to properties> select compatibility tab and make a check on the checkbox"run this driver compatible for" and select the latest version of operating system for which the driver is available....

guess it may help you out...

According to belkins wweb site there is no Windows 7 driver or support for this card. From what I could find on else where it should just work with Windows 7. If you have the card installed and it is not being detected by Windows 7 I would remove the card with the system powered off. Turn it on so it "notices" that its no longer there, then power off and put the card back in, in another slot if you have one. turn it back on and it should detect it.

You may try updating the driver for it from device manager. Insert your Belkin disk then follow the steps below.

1. Click on start button.
2. In the run box type devmgmt.msc and then press enter.
3. Select the Belkin wireless g desktop card device and right click on it
4. Now select properties.
5. In the properties window, under Driver tab, click on Update Driver button.
6. Select Install from list or specifec location
7. Choose Include this location in the search and use the drop down box to select cd rom
8. Click browse expand your cd rom drive and find the Belkin drivers and click ok.

The link below may help as well
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly

just installed my belkin wireless g usb adapter on windows 7 64 bit down loade driver from belkin right click run in compaterbilty mode windows vista service pack 2 and install