Told mobile set up is ready to use dont know what to do

For OBD 2 there are thing's the cars computer check's for emissions , there called monitors . When these monitors run an set the vehicle will be ready to pass an emission test . OBD Readiness Monitors Explained OBD Auto Doctor Scantool Garage Read this if you would like to know more . Normal driving will set the monitors in time or you could try an speed up the process with a drive cycle

You may try default phone and security code to remove :
ur defalt phones codes is 12345 or 00000 u can use it


Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Hello,

It's very simple.
First, call your phone's service provider.

Ask them if your phone can support gprs (if you don't know that already)

If it's supported, ask them to activate gprs for your phone.

The activation will be done within 2 or 3 hours,.

Finally, you will receive a service message containing the gprs settings required to browse the internet on phone.

Thats it.
You're ready to surf.

But do confirm data transfer charges. They can be costly.

To start surfing, just open the phone browser, and enter the website you want to go.

Regards

first of all GPRS is network dependant. you need o get the settings from the mobile service operator. once you get the settings

select the softkey(center key) choose "webaccess", there "web sessions".
select the settings as default or create a new settings manually with the instructions provided by the operator. dont forget to set it default.

you are ready to go.

if that doesnt help, contact customer care.

Hi Friend,
Just remove the battery from the mobile and keep it for 30 sec and replace the battery now and switch it on.The mobile will be ready.Check it and kindly provide the feedback

Regards,
Ayyasam

try this link i think i t will work

http://techamin.blogspot.com/2009/07/aircel-manual-gprs-setting.html

login on gmail
go to settings
Activate POP3
now go to mobile settings
do the settings as written in gmail

Was wondering if you got set fixed yet? STK-392-180s are the ics I use when repairing convergence.Replace both chips.