BenQ PB6200 Multimedia Projector Logo

Related Topics:

Posted on Jul 15, 2010

Turn on benq pb6200 with new bulb all I get is humming and no led

Turn on benq pb6200 with new bulb all I get is slight humming from inside with green control lights on but the 3 leds not on, took apart inspected main board and everything seemed ok, nothing looked blown, put back together and powered on for about 20 secs and projected while the 3 leds were on. Then went out and wont go past quiet humming and green light controls only on????????

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Aug 27, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Aug 27, 2010
Answers
1
Questions
0
Helped
349
Points
1

Same problem here. checked fuse, mainboard seems ok. nothing looked blown.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My pb6200 benq projector's colour is wrong. Missing green. Has a lot of blue & red. How do I fix this please? Have since replaced the lamp - does the same with both old & new lamp. Also has a...

Your correct about missing your primary color. this could be either your cable or the connection at the projector could have a bent pin on the port. not sure what your trying to display computer?
2helpful
1answer

Power is on, projector isn't working

if there are no leds lit, replace the power supply. if there are, and the fans are on but no light, it's the colorwheel.
0helpful
1answer

Unit does not power up

if there are no leds lit, replace the power supply. if there are leds and you get fans but no light, replace the colorwheel.
0helpful
2answers

Flickering dots on Benq PB6200 projector.

it's not the lamp. if you've replaced the cords and still have the problem, reset the settings to factory default to make sure the resolution matches. if still not ok, there may be an issue with the main board.
0helpful
2answers
0helpful
1answer
3helpful
3answers

BENQ PROJECTOR

Mine needed a "fan module" replaced. The part number is 60.J8613.011.

Cost was $60, plus $100 for labour.
0helpful
1answer

Benq PB6200 projector lamp or other problem

Hi there

I replaced a Mainboard on a BenQ PB6210 just yesterday - had all the same symtoms.

No LED lights coming on but the rest of the buttons has light.

Tried every other component from the lamp to the colourwheel , but the Mainboard replacement fixed it in the end.

You'll be looking at about $95 for the part
8helpful
5answers

Benq pb6100, light bulb does not on, power ok

I fixed the exact same problem on my PB6200. Both back fans were not working, and the bulb would not turn on.

In my projector, the fan board had a bad capacitor. The fan board is the one where all 3 fans are connected, and which is facing upside down on top of the powerboard. The bad capacitor on my projector was coded C7302 on the schematics. It's a brown, 25v 470uf capacitor.

I recommend you to open your projector, unplug all connections to the fan board, turn it upside, and inspect the capacitors and other components. Bad capacitors have a bulge and/or a black stain or fluid coming out on the top. You can find pictures on the net.
Not finding what you are looking for?

359 views

Ask a Question

Usually answered in minutes!

Top BenQ Office Equipment & Supplies Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66830 Answers

Are you a BenQ Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...