I HAVE NOKIA 5130 WHOSE SCREEN HAS GOT BLANK AND A COMPLETE WHITE SCREEN IS COMING.

Frequently nokia 5130c damage / corrupt it's operating system.To fix this you need to flash the phone, if you want to do it by yourself Click here1.And here is your 5130 flash file.During selection of Product code choose this 0579014: RM-495 CTR SEAP MS SILVE BENGALI BANGALA.Good luck

There are two options because it is due to two reasons.
1st the LCD has expired for this you need to replace or get it replaced.
2nd and the priority basis method is to upgrade its firmware. Just connect it with data cable and from nokia updater, update its firmware.

Safe all the important data before doing this.

best of luck!

nokia 5130: when I try to turn on the phone, the screen goes white and nokia logo appears like always, then the screen goes white and after several seconds it turns off

Here are the complete requirments and complete procedure. First download and install Pheonix from this link. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link 5130 flash file and install it to C / program files/pheonix.. after finished this installation open pheonix . Inside the interface at the> top left <there you see "File" click there and choose "open file" and then select the approprait Product type i.e "which is written on the back panel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there, when you click there you'll see three sub-menus, just select the "Firmware Update" again you'll see another interface. Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Button and choose the code which is written in the back side of your phone. e.g CODE:0000000.if the same code does not found just take one which is higher. After this you can see "Dead phone USB flashing" click that box. Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead, unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" button after this, a message will prompt you "press power botton" etc. insert charger or press it and wait until the phone will Restart automatically in normal mode 10-15 minutes. If you cannot understand just leave a Comment / Click here1. thanks for visiting fixya. Good luck

The 'ON' button needs to be pressed properly

DEAR FRIEND,ALL YOU ARE GOING TO HAVE TO IS TO FLASH YOUR PHONE.

Switch-off your phone. 1. Press and hold 3 keys; Green dial key, * Star key, no. 3 key on keypad and then press the power on/off to swtich on the phone. Remember, do not let go the 3 press and hold keys until you see a formatting word screen show! 2. After a few minutes when the Full phone formatting completed, your phone will back to original system and factory settting.

please format your phone using first switch of your phone then press the star(*) three(3) and call button holding these button and switch on the screen displays blank white screen for sometimes and then on .

nokia 5130 c_2 hang (white nokia simbail)

That means your phone got a corrupted software installed to its memory. A hard phone reset can solve this problem. Typically a nokia symbian series phone can be formatted using this code *#7370# then the default key is 12345.

Hope this could help.