When I turn the printer on I hear a grinding noise. Upon closer inspection I see that it is the belt under the glass scanner, it takes the scanner cartridge out towards the center of the glass and on it's return to the start position seems to get stuck on something, thereby causing the noise. I have opened it up several times cleaned it out moved it back and forth manually. It worked for a short while then started again. I can't see anything that would cause it to jam, I even looked at all the white plastic gears in the housing where the belt wraps around and still can't find anything causing it to get stuck like it does. Is there any way of disconnecting the scanner and still use the photo copier and printer? I can live without the scanner.
SOURCE: HP Officejet 6110 scanner carridge appears stuck
Unplug the power. Plug back in, while simultaneously holding hash (#) and (6) buttons, until S-reset is displayed (sometimes this can take like forever) but it is a documented HP mode.... Then set up machine using 1 key to confirm options and arrow keys to select options.
To enter another maintenance mode (fat lot of good that will do you), press and hold * and #, then press 1 and then 2 and then 3 (or 5) for a variety of different options, which include testing of the scan bed. This of course only works once the scan bed has initialised...
Or: take out all cartridges and close doors. Wait until it complains, or indicates a cartridge jam.
Regards
All-knowing.
SOURCE: scanner failure hp 6110 - Noise and stuck head
Hi,
the error message refers to the hardware issue of the printer. Below is the document that i need you to follow to somehow resolve your issue.
CLICK HERE==>> DOCUMENT
Please let me know if the document that i gave to you resolves your issue.
thank you so much.
adonscott
SOURCE: I recently aquired a HP psc 2410 all in one
There is little or no value in older printers.
However the unit has gots its positioning confused.
Try switching off and on printer several time, opening lid for cartridge change to see if it can synch itself again.
------
Please dont forget to vote if you liked my answer
thanks
Testimonial: "Thanks for the quick response. I will try it. Hope it works. Thanks."
664 views
Usually answered in minutes!
×