Could you tell me what error code 003 is for a zanussi zbd 903 built in double oven

F9 is a problem with the oven door lock circuit. If the door is locked, it's probably a bad switch that tells the oven it's locked. If the door isn't locked, it's probably a problem with the lock mechanism.

A common problem on many built-in GE ovens (you don't say if yours is built-in or free standing...) is air circulation in the control panel. The fan that keeps the panel cool either stops working or gets clogged with dirt/dust and can't move any air. This causes the panel to overheat and can cause all kinds of odd problems and error codes. If you have a built-in, check to make sure the fan is working and the mesh screen behind it is clean.

F9 problem with the oven door lock circuit. If the door is locked, it's probably a bad switch that tells the oven it's locked. If the door isn't locked, it's probably a problem with the lock mechanism.
A common problem on many built-in GE ovens (you don't say if yours is built-in or free standing...) is air circulation in the control panel. The fan that keeps the panel cool either stops working or gets clogged with dirt/dust and can't move any air. This causes the panel to overheat and can cause all kinds of odd problems and error codes. If you have a built-in, check to make sure the fan is working and the mesh screen behind it is clean.

It certaily should, if they are not with the oven, then I would contact the people who supplied the oven in the first place, and request the pan etc.

probably a failed heating element . I just decided to change all of mine cos after a few years they dont get as hot

If you are in the u/k,then I suggest you go to the zanussi web site,


WWW.SERVICEFORCE.CO.UK

Altrnatively, you could try a local deaer,whoo repairs cookers etc, they often have these sort of parts in stock.

If oven is getting hot , but not hot enough, then the thermostat is probably faulty.if no heat at all, then you need to replace the oven element.
Please rate my solution.
Thanks.

You could but if you disable the timer and anything goes wrong with it could invalid your house insurance if anything went very wrong.

have you reset the clock after the power outage?
this is necessary before oven will work
suspect you have it on auto in error

you will have to modify your cabinet