I have a Viking/Husqavarna Designer SE sewing machine - 2005 model. The USB drive does not regularly read the USB flash vaults. Does this mean the drive is going/gone on the sewing machine. The drives work great on the computer and in the embroidery software on the computer, just not with the Designer SE sewing machine. Machine was working great, I keep it unplugged when not in use, to prevent power surge damage. When I went to sew after not sewing for about 2-3 months, it would not read the USB flash drives without turning the machine on and off a couple of times and jiggling.
I have a Designer I USB that suddenly started not reading the usb stick that came with the machine. I was terrified that my machine was going bad, but I always start with the cheapest solution first. I bought a new usb stick, loaded the designs from the old one into my software then loaded everything on the new usb stick. My machine reads it every time so far. I replaced the usb stick about 3 months ago and have not had another problem since. I don't know if this is your problem, but usb sticks can go bad and since they are so cheap, I would try this first.
1,418 views
Usually answered in minutes!
Thanks for the suggestion. Being kind of computer literate, that was my first line of troubleshooting defense. Tried 4 different USB's - 2 new and 2 I have been using. The only one it would occassionally pick up if I finagled it was one of the older ones :(
Thanks for the post....I dropped it off to be serviced and will see what they have to say.
×