Mpc 1500s sc 202 and af 1075 sc 995 - Ricoh Aficio 1035 Copier

Noise aside, the most common cause of 202 codes on those things is the front door is not closed on the left hand side. It activates the laser shutter.
Mar 10, 2018

Ricoh aficio SP 5210 SF loud noise and error code SC-202. is ...

Copytechnet https://www.copytechnet.com > ... > Ricoh

Ricoh SP5200DN - Error Code: 202

Printcopy.info https://printcopy.info > brand=Ricoh > code=202
Code: 202; Description: Polygon motor error 1: ON timeout. The polygon mirror motor did not reach the targeted operating speed within T1 seconds after ...

really a job for a technician

https://www.google.com/search?q=ricoh+sp+5210sf.+replace+laser+unit

..

If you wish to get some details about printer repair and service; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

http://www.bing.com/videos/search?q=mega%202%20use&qs=n&form=QBVR&pq=mega%202%20use&sc=4-10&sp=-1&sk=

mega 2 use Bing Videos

• NoiseRFID: Communication error • Communication error occurs when the RFID starts to communicate with the RFID receptor. • Retry of RFID communication fails three times after the machine has detected the RFID communication error.
The problem is Defective RFID reader and writer • Disconnected ASAP I/F • No memory chip on the toner cartridge • Noise

Video might not help but this problem is due to the charge spring arching on the back of pcu, suggested fix eould be to restore spring to its original condition and add conductive grease to the charge plate on tge rear of the pcu. Hope it helps

Problem code sc 865 01

I have Aficio MPC 2550 and it displays Sc 829. Is the a way to reset this code?

sc 670 on ricoh MP 1600

sc 990 relates to the nv ram chip on the main board also check the values of the lazer unit are correct and not changed

Hi Kathy,

Are you ready?

1. Make sure the Nikon SC-29's Red Panel's Lock Switch is set to the Left. Pointing at Left Black Screw.
2. Connect the Nikon SC-29's (Red Panel) to your camera's Hotshoe by pushing it as far as it goes.
3. Turn Lock Switch to the Right (turn CW). This locks down to camera.
4. Make sure Nikon SC-29 (other ends) AF-ILL is set to OFF.
5. Make sure your Nikon SB-800's Lock Switch is set to the left side.
6. Attach your Nikon SB-800 into this Hotshoe.
7. Switch the Lock Switch on flash to the right.
8. When you wants to AF from flash, set AF-ILL to "OFF"
9. For the best results, set AF-ILL to "ON".

I teaches, do repairs, services and modifications on all photographic equipments.

I hope they are helpful to you as well as for any Nikon Photographers using the Nikon SC-29 Cable.

Mine has Autofocus, ITTL, Slave and Wireless Radio Remote Flash.

Truly,
[email protected]