Pleeze help, ok i insert my memory card reader and computer recognises, fine, however when i insert my 16gb sandisk m2 memory card.....nada, nothing, zilch!?? It says that there is no media inserted and now its driving me nuts!! any suggestions?

try using a multi card reader that shoul solve the problem fast

You should not need drivers. Chances are that the drive died. I would try putting this device in another computer first. see the results. The wear leveling mechanism on most of these drives is limited; and it will start "not working" when it's reached the end of life. A professional data recovery company can get it back usually. http://techrxgb.com

Preformat : By Fix-shad0w

#1
Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com
#2
Open up 'My Computer'. You should see it under the list of available drives.
#3
Check its contents first to make sure that you have the right drive.
#4
In 'My Computer', right-click on the drive and choose 'Format'.
#5
Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.
#6
Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.

With A USB , CELLPHONE , Camera The SameThing

Yes, you will need an adapter unless you have a card reader that accepts that specific type of card.

this happens dude.

try to format it using a memory card reader on a computer, sometimes the card get corrupt

format it, it shld work fine, u can copy ur data also on the computer for a backup.

the card shows sign of a rom ic being lost its firmware

You need to isolate the problem. Try connecting the Sandisk M2 into another phone or computer (using an adapter). If this memory card is detected by other phone or computer, then you may want to insert another memory card into the problem phone to test it.

If the problem phone works using another memory card, but the problem memory card also works using another phone, then you may want to format first your Sandisk M2 before using it.

Have a great day!

The Memory Card Had Damaged You Need To Replace It.

vivek,

try to insert your m2 memory card to other card reader device and check if it can be recognized. then scan for possible virus infection or reformat your m2 memory card.

if still no change, clean the contact pin from your m2 card. use metal folish liquid solutions to clean the copper contact pin of m2 card.

cheers,
mark

Hi,
Try to put the memory card into the card reader of any system. If nothing comes, your memory card has some problem and is better to get it replaced.

Thank You