NEED A WIRING DIAGRAM FOR A GE MODEL NUMBER JRP14G0P4BGELECTRIC WALL OVEN SERIAL NUMBER GL6738700

To find the correct replacement baking element for your GE Rapid Clean II J55BF-1 wall mount oven, you can try the following steps:

1. Locate the model and serial number of your oven. This information is usually found on a label on the inside of the oven door or on the back of the oven.
2. Visit the GE Appliances website or use an online appliance parts retailer to search for the part using your oven model number.
3. Look for the baking element part number in the oven's user manual or service manual. These manuals may be available online or from the manufacturer.
4. If you are still having trouble finding the correct part number, consider contacting the manufacturer's customer service department for assistance.

Once you have the correct part number, you can order the replacement baking element and follow the manufacturer's instructions for installation.

Hopefully this will help. Don't know if it is the same model, but it is a 60s GE built in oven.

Question edited for clarity (don't like # for the word 'number':).

Unfortunately, the issue is that the model number doesn't exist as you have written it. If it did, this would find it

https://www.google.com/search?q=JK14009+HT

But the problem is that you put a space between '14000' and 'HT'. When you remove that space, all the parts suddenly appear! :>)

Now you have the parts schematics and the companies that sell them.

https://www.google.com/search?q=jk14009ht+parts+diagram

..

Contact GE directly to request a wiring diagram (not a schematic) for model JT950S0y1ss.

Could you please double check that model number? I don't see a oven under that number.
Regards,Richard

For anyone installing a replacement oven controller #WB27T10276, there is a GE publication # 31-10515 that should answer your questions. I bought a rebuilt control that did not have this info. with it. Lucky for me, a retail appliance parts store opened a box with a new control in it and copied the instructions for me.

from the serial # it was made in september the second letter N is either 1956 or 1972.
take a look at this site it'll lead you to ge heating elements
see if there is one that resembles your's.
then call them. they are very helpful and may be able to tell you where the model # is. ask if what you're seeing might fit.
here's the link...
http://www.appliancepartspros.com/ge-wall-oven-heating-element.html
Hope this helps a little.
Happy New year

Hi.


I do not have wiring diagram for this ERC. They had never been made available online by GE.

Here GE contact contact 1-800-626-2005.

All I can give you is the oven diagram below:

I have the same problem -- did you ever get this question answered?