My n-72 is very slow! i.e it's working process is slow

Error code 72 on a Quantum 4Front wheelchair typically indicates a problem with the joystick or controller. The best way to resolve this issue is to first try resetting the joystick or controller. Here's how to do it:

1. Turn off the power to the wheelchair.
2. Locate the joystick or controller and unplug it from the wheelchair.
3. Wait for at least 10 seconds, then plug it back in.
4. Turn the power back on and see if the error code 72 goes away.

If the error code 72 persists after resetting the joystick or controller, it may be a problem with the joystick or controller itself and it may need to be replaced.
Please be aware that it's important to follow the instructions in the user manual of the device and only use the recommended parts and accessories to avoid causing more problems.
It's also possible that the problem could be caused by a different issue such as a malfunctioning circuit board or motor. In this case, you may want to contact Quantum customer service or a qualified technician to diagnose and repair the issue

Low gas,slow leak.

The basic treatment should be like any other muscle type injury and follow the famed R.I.C.E.R process (Rest, Ice, Compression, Elevation and Referral to a professional)
Ideally start RICER within 48-72 hours of the injury. I realise you may have been suffering with them for some time, in which case get onto it now.
Taking some Anti inflammatory tablets
Rest -
Keep your leg(s) as still as possible. Slows blood flow and prevents more damage.
Ice -
Crushed ice in a bag, frozen bags of peas etc. This works wonders in reducing swelling. Wrap the ice bags in a damp towel to stoop skin damage. Try to apply for 20 minutes for 48-72 hours (when awake!)
Compression -
Wide, firm elasticated bandages around the area above and below.
Elevation -
Raise the leg above heart level all possible times. Reduces swelling and bleeding.
Referral -
If it is severe and you can hardly walk hours after the onset of pain then you should get to a pro physio or sports doctor for a specific rehab to further reduce injury time.

Carrier Infinity system is a variable speed unit that will just slow down as it approaches set point. Unless it overshoots the set temperature (you have it set on 72 and the temperature keeps rising above 72) this just sounds like normal operation.

Because the DAT72 can copy 72GB with 2:1 compressed, and it's native capability is 36GB in the most. So you can try to copy less than 30GB data to it or try to enable the drive's compress mode.

hi
clear ur sms inbox nd save all ur data in ur memory card nd if it doesnt solve then u have to upload nokia n72 software for hanging problem and simply change ur battery for battrey problem nd if doesnt help then its a hardware fault...thanx

There isn't one, you will have to contact Asus main offce.

sounds like your dmd module. its the part of your optical block that processes the images that make up what is projected on your screen.. without a model # i can't tell you the part #

You may have damaged something on the board during the process. I suggest going over what you did, making sure the 72 pin connector is seated properly so the connection can be made cleanly, and if all else fails snag another one on ebay and try again...

If its an external drive go to my computer, right click on the drive and click format. In the format box you should be able to choose which file system to use. Note: This will erase ALL data on the drive. This works with any secondary drive. For the primary drive you would have to reinstall windows, formatting in the XP setup process to change the file system type.