Washer blinks F1 but works when reset only to blink F1 later in the cycle. (Cabrio washer)

looks like a faulty contact maybe. See this site:
http://applianceassistant.com/Washer-Repair/Cabrio-Bravos-Oasis/Cabrio-Bravo-Oasis-Troubleshooting2.php

F1(F68)-Pressure Signal Out-of-Range
I telephoned Whirlpool at 1-800-253-1301. Whirlpool acknowledged the F1 fault and will send a serviceman, free parts and labor, to correct the problem concerning the "famous" F1 fault. This is even for washers out of warranty! This concerns model WTW6600SW2 washers. Be sure to get the authorization code from them so the service person cannot argue about costs.

is it f1 if yes call whirlpool they will fix it for you for free all you need is a concession. you have a bad control board. make sure you only use he detergent.

Hi. uL is displayed when the machine/motor control detects an off-balance load, and is steady on while the washer runs a mini-cycle to rebalanced the load. Display clears if mini-cycle successfully rebalanced the load. If the mini-cycle is unsuccessful, uL will flash until the door lid is opened, allowing the customer to view and redistribute the load.

Hi,
The "F1" error code on the Whirlpool cabrio is quite common, and generally has to do with the control board. Replacing the control panel may resolve this issue. However, I believe Whirlpool is aware of the F1 issue with the Cabrio, and is fixing some machines for free. Please call 1-800-253-1301 for more details and see if you are eligible for a free repair.
Thank you !!

F1 is the control board failure and you need to replace the control board inside the machine that controls the entire machines cycles

gotta replace ur main board

It is an overload code. I has something wound around the shaft under the basket. it is decent tear down job so I would not attempt it unless you are mechanically inclined.

call mfg. i heard they are fixing this problem even washer is out of warranty. to solve this problem your washer need new control board.

Hunca, We would like to inquire further about your post with you. Please respond back to this email address [email protected] with your name, user id (Hunca), phone number, street address, zip code, reviewer name, model & serial number, and date of purchase on the appliance.