I need the Digital Camera Solution CD-ROM or the download

Canon Support Drivers PowerShot A610

And if it does not want to download the pictures, just install Zoombrowser EX. You still can download this software from the Canon website. The drivers you need, are also there.
Without the appropriate software, no computer knows what you are connecting. We are so used to smart phones and tablets that we think all things are detected correct when connected. In the days the Powershot S3 computers still needed drivers and software. Most computers still do.

Do you really need the Canon software?

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa ( http://picasa.google.com ).


If you really want the Canon S3 software, you may download it from http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_s_series/powershot_s3_is#DriversAndSoftware

yes you can download to your and save on your computer then burn it on to a cd rom

METAL PRONGS IN SD SLOT IN CAMERA WERE BENT

You can find software and manuals at the following location, just select your current Operating System:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=320&modelid=17482

you can download software here
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=320&modelid=16338

All related software for ur camera See drivers and download section

Here

Pls rate me WELL !

What application are you using to pull the pix?

Download the needed software directly from Canon:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=223&modelid=7507#DownloadDetailAct