Clarion NX700 Car Video Player Logo
Posted on Jul 01, 2010

Clarion nx700 parking break bypass

How do you bypass the parking break in order to watch DVD while car is in motion

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Oct 15, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Oct 15, 2010
Answers
1
Questions
0
Helped
1060
Points
2

Wrong. To bypass the lockout feature so you can see the DVD play anytime - you need to toggle the green wire away from ground (from Low to High - i.e. momentary switch) so the radio sees the rising edge of the 12Vdc signal. The green wire is normally high and is tied low. When you put the parking break on - it opens the loop.


A switch will trigger the Opto Isolator inside the head and bypass the lock out feature. This works fine - or you can spend the $25 on the bypass module - that does the same thing - but works as an electronic toggle ~ based off the remote wire and an internal relay in the module. The module will toggle the green wire every time the radio powers up.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

How can i watch movies with car in motion

Hi, what you will need is a video bypass module
ALL ECLIPSE VIDEO NAVIGATION UNITS AUTOMATIC PARKING BRAKE BYPASS HACK...
I wouldn't really reccommend it, though, as the inability to watch videos while the car is moving is a safety feature built in your stereo for a reason.
0helpful
2answers
1helpful
1answer

Clarion nx700 ebrake bypass code?

this is illegal...for obvious reasons !
0helpful
1answer

My nx700 isn't playing videos

Install a toggle switch to the parking brake wire form the unit. One end of the wire goe to ground and the other to the parking brake wire. The unit needs to see the ground circuit switch; so,start the vehicle with the switch in the off position, then switch to the on( applying ground to the wire).
4helpful
1answer

I have a clarion max385vd and i want to bypass the parking brake. How do i do that the easiest way?

you locate the grass green wire and connect that to the earth and presto you can watch dvd's whilst u drive

hope this helps pls rate people havent been rating
1helpful
2answers

Parking break bypass

1: Go into AM/FM mode
2: Hit "setup" on the remote control
3: Enter 543210 on the remote, listening for the beep for each number entered
4: A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen.
5: Select Brake bypass to "ON" and hit the "X" near the bottom of the screen.
3helpful
1answer

How do i bypass the parking brake switch in order for my video to play

I think the wire that should go to your hand brake is green, all you need to do to bypass this is hook it to an earth.
Not finding what you are looking for?

1,070 views

Ask a Question

Usually answered in minutes!

Top Clarion Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Clarion Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...