Settings my Archos comes up with this message box that says that please enter yoy parental code, what is the code please?

1. On the Nintendo DSi Menu, use the stylus to select the Settings ("wrench") icon.
2. Select the right arrow twice to reach the third page, then select "Parental Controls."
3. Select "Yes," to change the parental controls.

1. You will be prompted for your 4-digit PIN.
2. If you know the PIN, select the empty text box and enter it using the on screen keyboard, then select "OK" to continue.

>
• If you don't know the PIN, select "I forgot," then select the empty text box for the answer to the secret question and enter it using the on-screen keyboard. Select "OK" to continue.
• If you don't know either the PIN or the secret question, please click here.

1. Select "PIN" to change the PIN or "Change Settings" to update the setting you wish to change. Once the changes are made, select "Done" to confirm any changes.

1. On the Nintendo DSi Menu, use the stylus to select the Settings ("wrench") icon.
2. Select the right arrow twice to reach the third page, then select "Parental Controls."
3. Select "Yes," to change the parental controls.
4. You will be prompted for your 4-digit PIN.
   • If you know the PIN, select the empty text box and enter the PIN using the on-screen keyboard, then select "OK" to continue.
   • If you don't know the PIN, select "I forgot," then select the empty text box for the answer to the secret question and enter it using the on-screen keyboard. Select "OK" to continue.
   • If you don't know either the PIN or the secret question, the Parental Controls will need to be reset. Please call 1-800-255-3700 for assistance.
5. Select "Clear Settings," then select "Yes" to confirm.

You're going to have to call nintendo to remove the parental controls. They will give you a special code to remove the parental controls.



How to Remove Parental Controls:
Use the information below to remove any Parental Controls that have been put in place.

1. On the Nintendo DSi Menu, use the stylus to select the Settings ("wrench") icon.
2. Select the right arrow twice to reach the third page, then select "Parental Controls."
3. Select "Yes," to change the parental controls.
4. You will be prompted for your 4-digit PIN.
   • If you know the PIN, select the empty text box and enter the PIN using the on-screen keyboard, then select "OK" to continue.
   • If you don't know the PIN, select "I forgot," then select the empty text box for the answer to the secret question and enter it using the on-screen keyboard. Select "OK" to continue.
   • If you don't know either the PIN or the secret question, the Parental Controls will need to be reset. Please call 1-800-255-3700 for assistance.
5. Select "Clear Settings," then select "Yes" to confirm.

1. Insert a DVD Movie into the PlayStation®2.
2. You should receive a message informing you that the Parental Level has been set, and asking if youý"d like to allow the disc to play. Highlight "Yes" and then press the X button.
3. A new window will appear asking you to temporarily change the Parental Control to a different level. Again, highlight "Yes", and then press the X button.
4. Another window will appear asking you to enter your Password. Above that window are numbers (0-9).
5. Do not enter your password, but instead, press the select button on your Controller. This will change the text in the window from "Enter Password" to "Delete Password".
6. Using the numbers above the window, input 7444. If successful, you will receive a message stating "Deletion Complete".
7. Press Select. You will now be asked to register a new password. Please select a four-digit code of your choosing.
8. You will be asked to confirm your password selection by inputting the same code once again. If successful, you will receive a message stating "Registration Confirmed".
9. Now you need to turn off the password altogether. The movie should of started playing by now. Press select and chose Setup. Go to the parental control "tab" and set the level to "off".
10. Now you should be able to watch any movie

Archos.com FAQ says I forgot what the 'Parental Code' is. Where can I get it?The factory default code is "0000".
If you have changed it and forgotten it, then you'll have to contact our Technical Support and give your 'Product key' (number of the device).
The 'Product key' is found under MENU > Settings > Software and Plug-ins.

Try 0000 it is the default or try a hard reboot by holding in the powerbutton for >15 sec. (I think).

The default code is 0000, try that.

If not, contact Archos Support with your model number and they will fix you up :D

i got the same problem, somebody help us please?

The default code is 0000

worked for my 605 wifi

I HAVE A SKY+ BOX ALSO , AMSTRAD MAKE ON BACK, TRY SETTING IT TO DIGITAL RECEIVER INSTEAD OF SAT RECEIVER, THEN SELECT THE MAKE PACE, THEN CODE NO 8 ( B676 ) THIS DID TURN OFF MY SAT RECEIVER BUT THEN ACCIDENTALLY SCREWED UP THE NEXT STAGE AND I CAN NOW NO LONGER TURN THE SAT BOX OFF,

BUT YOU MAY HAVE MORE LUCK, IF YOU DO NOT SCREW THE NEXT STAGE UP, BEST OF LUCK