How do you set the clock and alarm on the Starlite Next Play Clock Radio with iPod Dock NP105CR

Press the SET button to highlight which alarm (1 or 2) when it flashes press the function button up to 4 times to roll through the settings for which alarm you want to go off - IPOD, radio, buzzer. The fourth is OFF and OFF will start flashing. When OFF starts flashing, then stop and do not do anything for 5 seconds. Then the alarm setting of OFF will be intact. If you put on BOTH alarms, you will need to do this with alarm 2 as well. When you get back to the time if you have done it right, no alarm mode will be showing.

The Alarm is controlled by the Set button. Press Set once, then press Function to cycle through Alarm 1 functions until the display reads OFF. If needed, press Set again, and press Function until Alarm 2 also reads OFF. Press Set a third time, and you can set the main time with the Vol +/- (minutes) and the Skip (hours) buttons. Press Set a fourth time to return to normal display.

Setting the clock:
1. Press the set button 3 times until all of hte digits for the main clock are flashing.
2. Press the Skip Forward and Back button for the hour and the Volume Up and down for the minutes.
3. Press Set button once to confirm and exit the setting menul.

Call 866-387-2027 for manual

Setting the Clock:
1. Press the SET Button 3 times until all digits for the main clock are flashing.
2. Press Skip forward and back to change the hour and Volume up and down to change the minutes.
3. Press the set button once to save.

I've checked over the manual, there is no explanation, other than it increase increments until it is turned off or the snooze is applied.

go to the settings menu , display and then time and then date and then there should be a section for alarm

This is happening to my daughter's dock/clock too. It seems to have a short in the connection. If I jiggle it around I can get it to connect for a minute. Less than a year old, wish the warrenty was longer than just 90-days. Anyone know how to fix this problem?

on the top of the dock is an alarm button (clock) hold that down...will start to flash...go press the function button until u get to off...thats it!

whats the problem???

nope...there is nothing u can do..sorry.