Netgear DG834G wireless router wth built-in modem doesn't connect

Get this step-by-step guide to configure a Netgear Router/Wireless Router..

http://comprehensive-support.blogspot.in/2011/03/how-to-configure-netgear-wireless.html

so then you can simply reset the router so to go back to its default password ...or if you want to know your recent password, simply use your computer that is currently connected to your router and is working...then follow the steps in this link http://netspace.custhelp.com/cgi-bin/netspace.cfg/php/enduser/std_adp.php?p_faqid=508&p_created=1216184248 Configuring your Netgear DG834G & DG834GV Wireless Network
Note: you dont need to configure the wireless just check the password you have setup there so you can connect your ipad wirelessly...
Thats it!! (-_-)

any wireless printer should and will work with this modem-router as long as it's wireless settings are configured right, if you already have a computer connecting to this router wirelessly then that means the wireless functionality of your router is working. you just have to know the wireless settings of your router such as the SSID or the wireless network name, the type of wireless security and the wireless security key or encryption key.. once you have a wireless computer and it wireless feature is enabled it will automatically detect all networks name or SSIDs around the area, that includes your modem-router's and neighbors'.. when you try to connect to the SSID of your modem-router you will be asked for an encryption key or a password to be able to connect.. that will only happen if you have enabled a wireless security on your modem-router.

ok... you ned assistance... the modem connects to the router... if you look at the back of the router it should say internet. thats where you connect your modem to. then everything goes through your router...email me and I will try and assist

Yes it requires a phone line for AT&T, or a cable modem, or a community wireless modem to hook up to the internet

To go Wireless on your desktop Acer Aspire L3600, you should consider buying an USB Wireless Adapter. It could be any brand as long have same frequency with your Netgear (i.e 2.4 Ghz/5.8 Ghz)


P.S.: If this information was helpful, please rate this solution.

i would'nt recommend it, theres no need for two unless you have mote than 4 hardwired pc's and 8 wireless, especially if they are both modem/routers, you cannot use two, only one modem/router and one router

First use the Netgear setup wizard:-

Open Internet Explorer
Enter http://routeraddress e.g http://192.168.0.1
Click Setup Wizard (top left)

Then for With AOL make sure you have set these values in the Netgear
ADSL settings as PPPOa
VC 0,38
MTU setting to 1400

If you still have problems
Start -> Control Panel -> Add/Remove Programs -> select AOL Connectivity
click Add/Remove -> use the repair option
Follow instructions to repair.
Once complete make sure modem is configured and switched on and
try restarting AOL.
It should search for your connection, find it and allow you to log on.

You have to configure your router...

If your ISP provided you with IP Address, enter the assigned IP address, subnet mask, gateway IP address anbd DNS IP address for your broadband router.

If you connect to the Internet using an xDSL Modem and your ISP has provided you with a Password and a Service Name, then your ISP uses PPPoE to establish a connection. You must enter the required information.

Hope this could help..

Mon =)

You have to connect to the router with ethernet to get onto the configuration page. what i think what you have to do is to get a lan card and install it.