Have you every gotten an answer for your problem with Samsung Home Theater HT-DS610. I am experiencing the same problem whenever I turn on my DVD player it will say DVD/CD but then it will say Protection and turn off.
Thanks
Protect mode will kicking whenever a fault is detected.
Causes that can start protect mode are:
Electrostatic harges on internal circuits.
Leave the unit unplugged for power for one hour or so, this will allow discharge.
Bad speaker wiring.
Check speaker wiring, try unplugging and plugging back, or start after removing one speaker at the time.
Internal fault.
Internal
fault is the natural cause for protect mode. If all the above did not
work, then the problem is a blown component or an internal fault. In
this case the unit must be taken apart , tested and repaired by an
experienced person.
If the unit is less than one year old, or if you
want to get service, call Sony at the phone number listed on the
product documentation.
Regards.
1,998 views
Usually answered in minutes!
Hi omry i have same problem but with a different set ...HT-TQ 25 Samsun model . Immediately after operating it says protection and then shut down . Kindly waiting for solution.
My 610 does the very same thing.
Hello-DV/CD- Protection- Goodbye
×