Bought a 32" samsung lcd tv and i missin all the screws what size are they? I'm missing the three for the stand and the four that connects the stand to back of tv

Go to Walmart. They can rob the screws from inventory.

Contact the authorized service center for Samsung. Or the authorized dealer for Samsung. They can provide you the exact size screws. If you wish to get more details, surf this link. http://electronicshelponline.blogspot.com/ There are more than two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help. More than Nine and half Lakh viewers cannot be wrong. Disassambly procedure to many brand TVs are given in details. Check it out too. Pull up older posts.

If you still have the manual or know the manufacturer you might want to try giving them a call. They'll know what size screw was used on that model tv stand. Otherwise, measure the insides of the holes and go to a hardware store; they should be able to help you find the right one. Just make sure they are not too long. Screws are pretty cheap, so I'd suggest buying one of a couple different sizes to try out. They should fit snugly in the hole, but should not split the wood/plastic. You'll want to get four of the same size washers and nuts as well once you know what kind of screw you need. That way they won't loosen. :)

The manual for this model is located at

http://downloadcenter.samsung.com/content/UM/200903/20090331173532953/BN68-01883M-00L02-0219.pdf

From what the instructions say, there are 4 screws on the back of the tv, at the bottom.. These go through the tv and into the base. Remove them and it should come off.

according to manual the screw type is M6 , 1.00mm pitch and length is dependent on thickness of stand . you should have had a packet of assorted sizes of screw with the stand . you can also get the users guide by typing in make & model size

YOU CAN GET .PDF MANUALS AT SAMSUNG.COM.

I HAVE THE SAME TV. IT HAS EIGHT SCREWS THAT DON'T SEEM TO FIT IN THE HOLES, LEAVING THE TV WOBBLY AND LEANING FOREWARD.

ANY ONE ELSE HAVE THIS PROBLEM?

M5 X 18MM

Hello you remove the last four screws on the back of the tv located down at the bottom theres two on each side the stand will slide out...

i need a borad for my sova 32' lcd tv