Black screen I downloaded the latest easyshare software form Kodak.com. It is in my computer and the camera says it is in there but the screen continues to be black. rest of camera is fine.

Question edited for clarity. Your camera is a Z710 not a 2710.

Drivers and software.

Kodak EasyShare Z710 Digital Camera Software

https://www.kodakdrivers.com > kodak-easyshare-z710...
Mar. 15, 2017 - Kodak EasyShare Z710 Zoom Digital Camera Software, Driver, Firmware and Share Button software download for Microsoft Windows and Macintosh ...

Kodak EASYSHARE Z710 Software Download - Digital Camera

https://www.helpowl.com > Kodak > Z710 > Research
Appendix Upgrading your software and firmware Download the latest versions of the software included on the Kodak EasyShare software CD and the camera ...

Kodak EasyShare ZD710 Software Downloads

https://www.kodakdriver.com > kodak-easyshare-zd710...
Apr. 11, 2014 - Kodak EasyShare ZD710 Zoom Digital Camera Software Driver and Firmware for Operating Systems. Kodak EasyShare ZD710 Software Downloads ...

Mary, you can download the software from http://download.Kodak.com/digital/software/easyShare/v8_3_0/install_easyshare.exe

Press the SAVE button, find a place on your hard drive and save the file. Double click the install_easyshare.exe file and it will install the file. Follow the instructions below.

The file is good for KODAK EASYSHARE Software - WINDOWS Operating Systems
Installation Instructions

1. Verify that your computer meets the system requirements. NOTE: APPLE QUICKTIME Player is required for some software features. Visit APPLE to download the latest version of the QUICKTIME Player.
   
2. Disconnect all accessory devices from your computer (digital camera, camera dock, printer dock, photo printer, card reader, etc.).
3. Verify that you logged on to the computer using the administrator account.
4. Close all programs.
5. Download the software, then follow the on-screen instructions to install the software.
6. To launch the software select Start > Programs > Kodak > Kodak EasyShare > Kodak Easyshare software.

IMPORTANT: If you have a large picture collection, allow a few minutes after your computer restarts before starting EASYSHARE Software. EASYSHARE Software windows appear after your previous picture catalog has been updated

After the installation are completed, reboot if not asked to do so. You can copy the install_easyshare.exe file to a CD for later installation if needed.

Good luck and post back to let me know how it went.

Hello,

Here is the software for the camera:

EasyShare Software

1. Verify that your computer meets the system requirements. NOTE: APPLE QUICKTIME Player is required for some software features. Visit APPLE to download the latest version of the QUICKTIME Player.
   
2. Disconnect all accessory devices from your computer (digital camera, camera dock, printer dock, photo printer, card reader, etc.).
3. Verify that you logged on to the computer using the administrator account.
4. Close all programs.
5. Download the software.
6. When the download is complete, select Start > Programs > Kodak > Kodak EasyShare > Kodak Easyshare software.

Do you have Kodak EasyShare software? If you dont, then download it from Kodak.com site. Select "support" and then click on "Kodak Easyshare Software - Windows Operating System". Download and install in your PC. Use this software to download your pictures to PC.

The best way to install is to visit Kodak.com and download the latest version of the software that was developed for your new computer's OS. As always with Kodak, it's a free download.

Bill B

If this fault message is on your computer starting Easy Share Software: Please do a Clean Install on the software:
Please follow the instructions:

1. Uninstall Easy Share software:
1. Select Start > Settings > Control Panel > Add / Remove Programs.
   For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
2. Select Kodak Easy Share software.
3. Select Remove (or select Change, and then select Remove).
2. Run the Clear utility:
1. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
2. Click the Download button, and then follow the on-screen prompts.
3. After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.

For solving your problem it is necessary to remove your Easyshare Software completely from your system. Afterwards you need to install the latest version of Easyshare Software. Please follow the steps below: Remove Easyshare Software Click on 'Start' -> 'Settings' -> 'Control Panel' -> 'Software' Please choose 'Kodak Easyshare Software' Please choose 'remove' Please click on 'next' when installation wizard shows up Please choose 'remove' and click on 'next' Please click on 'next' to start the removal of your Easyshare Software. Please make sure that all files of your Easyshare Software has been removed from your system successfully. For remaining the progress please go to step 2. Even if you couldn’t remove the software or it is still in the list. For running Kodak Clear Utility: Please go to www.kodak.com/go/clear and follow instructions given on screen. Click on 'download'-button below on screen. Please choose 'open' and follow instructions given on screen. Please choose option 'save as' after choosing the download option to run clear utility from your PC. Please choose a save path. Open file clear5N.exe after file has been saved. Click on green starting arrow. The programme is running now. Please note! Please click on 'Ok' should messages appear for which you only have 'Ok' as an option that will make sure that you still run the programme. Should you been asked to restart your computer, please choose 'NO'. You receive the following message when the programme has finished: 'Easyshare files have been removed. Please reinstall Easyshare after system reboots'. Your computer will be restarted now. This action removes Easyshare Software from your system but it won’t delete any pictures or videos. But there is the possibility that you have to recreate your collection after reinstalling the Software. We recommend to download always the latest version of Kodak Easyshare Software. You have either the option to download the software free of charge by following the link: http://wwwuk.kodak.com/global/en/service/downloads/dln_ekn026079.jhtml?pq-path=4509

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

You can down the latest Easyshare software at :

www.kodak.com

The Kodak Easyshare software just index the pictures they do not store them at all
you can locate the pictures on the computer by

Click start
then look for search
type in in the search box *jpg
And it will display all the pictures that you have on your computer

To fix the problem regarding the easyshare software try uninstall it from your computer
Then download the clear utility www.kodak.com/go/clear
then download the latest version of the easyshare software www.kodak.com/go/easysharesw

Do the following to resolve this problem: Remove the camera from the printer dock. Download and install the latest version of firmware.